Mechanical drive for the speedometer only.
It depends on whether you mean electrical power or mechanical power. The electrical power comes from the on-board batteries. The mechanical power comes from the motor. The motor is what makes the electrical power turn into mechanical power this is what goes through the drive train to propel the wheels.The Electric car will get its electrical energy from the batteries. The electrical energy is then converted into mechanical energy by the motor. The mechanical energy is then transfered into the wheels providing the power needed to achieve propulsion.
Turbine i.e., engine converts fuel energy to mechanical energy by means of combustion...This turbine will drive the generator shaft i.e., mechanical input and the output will be electrical power and this electrical power will feed into induction motor which will converts this electrical power to mechanical power i.e., to drive the propeller and the ship will propel. The turbine used may be gas turbine or hydraulic turbine which depends on the speed of the ship should advance.
Turning mechanical energy into electrical energy The alternator works by turning mechanical energy into electrical energy. When your engine is on, it powers a drive belt that rests on a pulley attached to the alternator. The pulley turns the alternator's rotor shaft, which spins a set of magnets around a coil.
An electric motor is an example of an electro-mechanical energy converter. It takes electrical energy and converts it into mechanical energy, which is used to do work such as rotate a fan or drive an electric vehicle.
Energy conversion in computer is the process in which energy surplied to computer is being converted for computer use, is AC 2 DC
Modern lathes are electrically powered. They are equipped with a drive motor which is connected to an electrical source. The drive motor transfers mechanical power to the gearbox of a lathe to enable operation of its spindle and feeds. In earlier times lathes did not have a drive motor. A workshop had a central drive which transferred the mechanical power to a rotating shaft that ran the length of the workshop. All machinery were lined along the shaft and was connected to it via drive belts.
The computer contains electrical energy that acts as the basis of data within a computer and is also used to power the components of the system. Electrical energy is also converted to mechanical energy to make the hard drive spin.
Be more specific, which gauge or gauges, what is it or they doing or not doing that you feel is inaccurate or needs to be fixed?
mechanical energy. Chemical energy is converted to heat energy by rapid oxidation of the fuel used by the locomotive, the expansion of gasses from the combustion is converted to motive force(mechanical energy) by an engine. This motive force is converted to electrical energy by a generator to charge battery banks which store it. This electrical energy is converted back to motive force by the electric drive motors of the locomotive, which turn the drive wheels and pulls the boxcars.
drive on pavement haahah
If you are asking about electricity generation, this is when 2 alternators are not running in sync and they attempt to drive each other as motors for parts of the cycle. This can result in serious damage, both electrical and mechanical!
7.2 ft lbs as per the Yamaha repair manual