timing belt
gear itself have a hole a bolt 8mm.x 2inch you align hole and tread you got it timing,dodong sabawsabaw ne.
2.6 Isuzu engine is not an interference engine; in other words, if the timing belt breaks or cam gear locating pin shears, the valves will not collide with the pistons
With the the crank pulley at tdc, the white mark on the cam gear lines up with the center of the rocker shaft.
The cam gear timing marks for a Isuzu 320 V6 are located on the cam sprocket and the timing chain itself. The marks must be aligned with each other to ensure proper initial timing.
The crank mark is inline with the key facing straight up timing marks on diesel pump and oil pump you take the thin metal covers off both gears only the covers not the gears there are x1 hole in each gear that you screw a bolt with a 12mm head on it to lock them in place.
right side of engine on the bottom bolts in to front gear train cover not ran by a belt
Neither, it is all gear drive timing
how about timing gear
one is on the cam gear and the other is on the crank timing belt gear. spark timing is on the crank to the rear of the engine
9/41
This engine does not have a timing belt, it is gear-driven. Possibly, you have broken gear teeth, causing the timing to be out of order.