No you dont put any thing on head gaskets, the thing to do is get a surface grind done on the head and the block if needed.
Nope. The intake doesn't get hot enough to activate the clogging portion of the sealant.
intake gaskets are between the head and intake. head gaskets are between the head and the block..
Head gaskets, head gaskets, head gaskets
Head gaskets are supposed to last the life of the engine. There is no "care" specific to head gaskets.
There are ( 2 head gaskets ) one head gasket for each head on your V6 engine
YES
Purchase a Chilton Auto Repair Manual, and follow the instructions. Remember to take your time and get all of the gaskets you will need to do the work. Head, Valve, Pleneum, and possibly the Exuast Maniflod Gaskets.
There are many gaskets on any car engine. If you are asking about head gaskets, they are between the cylinder head(s) and the engine block. The cylinder head is under the valve cover. --------------
The 283 has a larger bore diameter, so use the 283 head gaskets.
Yes, 90's Subaru's head gaskets do blow out easily.
the whole set.
theres no way you can change the head gaskets without taking off the intake manifold, its not hard to do. plus if your going to change the head gaskets it would only be smart to change the intake gaskets also.Answerand if your talking about the exhaust manifold, you did'NT specify, I'm sure you can but it will be no fun at all, plus u should change exhaust gaskets if your going to do all that work anyways so you don't have to worry about them down the road.