The question is "use less of what?". If they are both the same wattage the 240 V light will use 1/2 the current of a 120 V light.
If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.
When equipment is run at a lower voltage than it is designed for, it does not operate correctly. A light will glow dimly or not at all, a heater produces much less heat. Electronic equipment may not function at all.
Yes, and the 135V bulb will last longer than the 120V bulb because the filament is thicker.The downside is that the higher voltage bulb will not be quite as bright, and its light may be slightly more yellow in color (the color temperature will be less when run on a lower than design voltage).
Mine has a 25 watt 120 volt bulb in it.
'Voltage' is electromotive force, and the 'Watt' is a unit of power. You can plug a 240 watt appliance (light, toy, radio etc) into a 120 volt socket as long as the appliance is rated for 120 volt AC operation.
Yes a 220 volt light bulb will run on a 120 volt circuit but at 1/4 of the wattage that the light bulb is rated at. A 100 watt light bulb on 220 would would be equal to a 25 watt light bult on 120 volt system.
If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.
Yes, the 130 volts you read on the bulb is the maximum it will handle. It will work perfectly on a 120 volt circuit and will actually last longer than a standard 120 volt bulb.
When equipment is run at a lower voltage than it is designed for, it does not operate correctly. A light will glow dimly or not at all, a heater produces much less heat. Electronic equipment may not function at all.
If the ballast of the HPS fixture has a 120 volt tap then, yes it can be plugged into a 120 volt receptacle.
Yes, the 130 volts you read on the bulb is just the maximum it will handle. It will work perfectly in a 120 volt circuit.
Yes, you can easily use it. Just install it as you would any other 120 volt light fixture and change the bulb from a 240 volt bulb to a 120 volt bulb. It will work just fine.
Yes. A 60W bulb has a higher resistance than the 40W buld. The extra resistance requires more current to light up the bulb. The fillament then glows brighter.
Yes, in fact that is what a rough service bulb is rated at. The bulb used on a 120 volt system will have a reduced wattage output as to what it would be on 130 volts.
Yes, and the 135V bulb will last longer than the 120V bulb because the filament is thicker.The downside is that the higher voltage bulb will not be quite as bright, and its light may be slightly more yellow in color (the color temperature will be less when run on a lower than design voltage).
It draws 2.5Amps
Yes it it is a 12 volt DC light bulb. It will not operate a household 120 volt light bulb.