It should, most Camaros had the TH700R4 trannys. None the less the transmissions would be interchangeable anyway.
it has nothing to do with your motor. your problem is your syncros in your tranny are going out. when you cant engage the gear at all then the synco is totaly f'ed up. the fix..... replace or get your tranny rebuilt. im having the same problem im just swapping my dx tranny for a si tranny
it is a fairly simple swap motor mounts should be the same you can use the same tranny if you like or not mounts are the same
The bell housing bolt pattern would be the same.
Typically, yes. Most 1990-1995 4runner's came with the same factory 3.0 V6 engine and are interchangeable.
Yes it is possible remove the tranny and engine at the same time. I have done it with a 74 and a big block and tranny
Yes, engines are different but the tranny's the same.
Yes 89-92 2.2l nonturbos are the same, and 89-92 turbos are the same
I understand you can use the same oil viscosity in both motor & transmission on the 2008 harley roadking!
The 1990 325i has a M20B25 motor. The earlier 1990 525i had the same motor, a M20B25, whereas the later 1990 525i had a M50B25.
On a 1991 Miata, the battery is in the trunk. It is probably the same on the 1990.
There is no difference. There both the same engines.
It depends on what motor was in the 94 and the 97...if they are the same motor then yes the tranny will fit if the 97 is a manual as well