You can not disable the factory alarm. It is built in as part of the computers. If it is a aftermarket alarm you should be able to remove it and put the car back stock.
10000
46RE46RE
The fuse for the alarm system on a 1998 Dodge Durango is located in the fuse box under the dashboard on the driver's side. You may need to consult the owner's manual for the specific fuse number, as it can vary. Additionally, there is a fuse box in the engine compartment that may also contain fuses related to the alarm system. Always ensure to check the fuse and replace it if necessary.
How do you disable the alarm system on a 1998 yukok
The transmissions are the same. The torque converters are different.
The big box you refer to is called the body computer. It is located on the drivers side behind the dash. You can not shut off the alarm or remove the alarm system if it is a factory installed system. You must find the problem and repair it.
you get a 4 pin harness from the dealership and it plugs right in by the fuse block.
You need to find a DRB III(chysler diagnostic tool), access the body modual, then access alarm system, read trouble codes for alarm system. This should direct you in the right direction of the problem. Check the hood switch, the are known to cause problems, it is located at to drivers side under the hood.
yes there was an alarm on some 1998s look under the steering by ther brake pedal there is a big box that should say code alarm system unhook the plugs from this it will disarm alarm and let you do what you want
How do i Recharge AC Unit for a 1998 Dodge Stratus
It can have power locks with out keyless.