Same engine
Driver side rear of engine block.
The freeze plugs on a 3.3 Dodge Intrepid are located on the engine block. They can be removed by using a punch and a hammer.
Driver side of the block.Driver side of the block.
Lower left side of engine block.
The vehicle identification number on a 2000 Dodge Intrepid motor is found etched into the block at the oil sump plate. This oil sump plate sits at a 45 degree angle to the block.
A big block Chrysler (Dodge) 440, or even a Hemi would bolt in, with the appropriate engine mounts.
Passenger side of the engine block, to the rear of the motor mount.
Driver side of the block.
The PCM (Power Control Module) on a 2001 Dodge Intrepid is located on the right side of the engine compartment just in front of the fuse/relay block. It is typically silver. There are two wiring harnesses that plug into the side.
The thermostat is located behind the alternator on the driver side of the engine. Follow the lower radiator hose back to the block.
Drivers side of engine just follow the bottom radiator hose to the block, that is where they put it unfortunately
It is on the front of the driver side of the block.