A 1997 Villager has a red button behind the driver side kick panel next to parking brake pedal. I found it by going to Ford.com/parts down loaded the owners manual. If you don't have the owners manual thy this.
If you're referring to the inertia switch, it's in the driver side kick panel.
The fuel pump reset switch is on the driver's side kick panel.
behind the drivers side kick panel
No, there is no direct connection.
At the top of the driver's side kick panel.
According to the 2001 Mercury Villager Owner Guide : The fuel pump shut off switch ( inertia switch ) is in the drivers foot well , behind the kick panel ( there is an access hole ) * from the drawing it is near the inside hood release
At the top of the driver's side kick panel.
If you mean the inertia reset switch, it's in the driver side kick panel.
What is the fuel tank capacity of a 1997 Mercury Villager van?
The fuel pump does not normally have to be "reset". If the vehicle is in a crash that causes the inertia switch to trip, the switch will have to be reset before the fuel pump will run.
If you mean the reset button on top of the FUEL PUMP SHUT OFF SWITCH the switch is located in the drivers footwell , behind the kick panel , by your left foot ( there is an access hole ) on a 2000 Mercury Villager
I'm not sure what you mean by a rollover switch, if you mean a fuel cutoff switch, it's in the driver side kick panel.