0
Does a CD have to have more power from the amp to make the sub work?
Wiki User
∙ 11y ago
Ok so u do have a cd player yes ur cd player needs to hook up an amplifier to play ur sub woofers the cd it self doesn't have enough power to play the subs
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What do AMP connectors do?
AMP connectors are used for power cords and sockets. They will help your power cord work.
Will a 5 amp device work with a .5 amp power cable?
Yes, the larger cable can carry more load (current) than the other cable.
Will a 12v 2 amp device work with 12v 5 amp power cable?
Yes, the larger cable can carry more load (current) than the other cable.
Why does your amp work without a ground wire?
your amp will ground in your sound system, or through your power adder which rock.
2amp work with 3 amp power?
you haven't asked a question
Do I need to have a cabinet for a Bugera 6262 amp head to work or can it work on its own?
You need a cabinet with a tube amp or you will potentially damage/destroy the power tubes and/or the amplifier.
Does 220 amp service use more power than 110 amp?
No, they only use the power drawn from the service. The fact that is is 220 amp or 110 amp makes no difference. It is the load that is applied that determines the amount used.
Why wont your amp make your speakers louder everything is hooked up and the amp is on?
i would check you have a good ground the amp will still power up but no power will be put through the system if the ground is not good
No power to the 10 amp fuse for vehicle Cigarette lighters?
really it should work
You have an 1988 Grand Marquis and you are not getting power to the amp but you are getting power out of the stereo to the amp Is there an in-line fuse or something of that nature?
Make sure that your remote wire from the stereo to the amp doesn't have any breaks in it. Also, make sure your ground is good, and that your battery connectors are tight.
Can kenwood super bass speakers work oin yamaha amp rx v640?
Yes, just as long as the impedance of the speaker is the same as the output impedance of the amp, and the power rating of the speaker is as much or more than the power rating of the amp. If the impedances are different, then the audio won't sound right, and it's possible that the mismatch could damage the amp. If the amp pushes out more power on peaks than the speakers are rated for, then the audio peaks will be fuzzy and distorted. The simple cure for this particular inconvenient situation is to keep the volume down to where the audio peaks don't sound fuzzy.
I need 100 amp 220 3 phase for the yacht I work on to get shore power the dock only has 50 amp 3 phase but there is 2 of the connections Can I combine them and make 100 amp service?
NOT A GOOD IDEA! Bring in an electrician. It would be well worth the expense and you might be able to find a way to work around those specific requirements.
