0
Yes it does. Most of the hoods from the JOHN DEERe tractors of that era are interchangeable. Here's a list of the hoods that will fit the 318:
200 series: 200, 208, 210, 212, 214, 216
Early 300 series: 300, 312, 314, 316 Kohler, 317
Late 300 series: 316 Onan, 318, 322, 330, 332
400 Series: 400, 420
The hoods for the 200 and early 300 series mowers are slightly different than the hoods for the late 300 series. They will all fit a 318, but the hood used for the late 300 series uses a different type of headlight lens than the hood on the 200 and early 300 series. The hood for the 200 and early 300's has a lens that just covers the front. The hood on the late 300's wraps around the front. Hope this helps!
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What kind of hydro oil does a John Deere 318 take?
john Deere 318 what oil in hydro does it take
What years did John Deere make the 318?
1952 t0 1989
Air gap john deere 318 electric clutch?
.18
What is 2 and 316 as a decimal?
2 and 316 = 318.
What is the deck mower belt size john deere 318?
91" long, 5/8 wide
Where is the fuel pump located on a John Deere 318 lawn tractor?
Right side of engine on rear
Where can you find a wiring diagram for a john deere 318?
Diagnostics needed for john deere f510 electrical system
What could be the problem with my john deere 318 onan engine that causes it to surge when idling?
probably the governor going bad
How do you get from Madrid to malaga?
A-4 to A-44 to A-316 to A-318 to A-45
Will a 60 inch deck from a john deere 420 work on a 318?
Not supposed to, the 318 was designed to have the 46 in or the 50 in deck on it. The 60 in decks mounting hardware that was used on the 420 is not the same. But if you can get it to work, good luck.
What year would a 44 loader for a John Deere 430 utility tractor have with the serial number TY0044A001955?
The loaders will fit a variety of tractors, the difference you must know is the attachment pieces. Does it have a belt driven or shaft driven pump? If it is belt driven it is for the 300 series John Deere garden tractors. - 316, 318, 322, and 332. Shaft driven pumps are for the 420 and 430 tractors. Next you need to know what frame you have. There are three different ones. For the 300 series, 420 and 430. Hope that helps...
How can find the model number for john deere riding mower?
First look and see if the decals are still on the hood of the riding mower, if they are there those are the number of your mower.If the hood and/or the decals are missing then you need to find the serial number, which is located either directly under the steering column, at the back on the rear axle, or near the front on the side frame.Once you have located your serial number, look at the number. It should begin with the Prefix M00 and then the model number of the machine. For example if you find this serial number (M00318X222001) you would have a John Deere 318. Hope this helps.
