No, The Toslink optical transfers method is thru the use of light, the 3.5mm jacks carry information thru metal condoctors (wire).
A toslink cable has a round connector that provides digital audio data using small pulses of light instead of electricity. It is manufactured by Toshiba.
There are essentially two ways to get surround sound out of the Xbox. Via HDMI or via optical (TOSLINK) out. If you have the component video cable, then the end that attaches to the Xbox has an optical out port. Simply attach this to the optical in on your home theatre receiver with an optical cable. If you want to use audio via HDMI, in order to get surround sound you'll have to have an HDMI receiver capable of receiving audio. In this case run the Xbox via HDMI to the receiver and then the receiver via HDMI to the TV. The HDMI will send both audio and video. If you have the official Xbox HDMI cable you can also connect the HDMI cable directly to the TV and use the optical out connector that it comes with instead.
Nothing extra is needed. You need to connect the mixer to the game console with the included TOSlink optical cable.
It is the connector for the OPTICAL cable to plug into.
A Toslink IS a Fiber Optic Digital Interconnect cable
Yes, the RadioShack Digital Optical Cable Connector is very easy to install. It's just as simple as unplugging and plugging in a standard TV cable.
A Molex Connector connects to optical drives and hard drives.
sc connector means subscriber connector and st connector means straight tip connector
The RadioShack Digital Optical Cable Connector comes with a limited 90-day warranty from the manufacturer. RadioShack stands behind their products, so you should have nothing to worry about.
Yes. Simply run a coxial aidio cable or a Toslink cable from your sony playstation to your amplifier and you will have linked your sony playstation with your home theatre.
If your surround receiver has HDMI, connect an HDMI cable from the NeoTV to the receiver, and then HDMI out the receiver to the TV. If you don't have HDMI on your receiver, you can connect an optical cable from the NEOTV to the surround receiver.
An optical audio cable is used to transmit digital audio (AC-3) signal from the source to the receiver, such as from a DVD player to a digital audio amplifier/receiver. You can transmit 5.1 dolby digital or DTS surround sound with an optical audio cable, same as digital coaxial audio cable.