There are essentially two ways to get surround sound out of the Xbox. Via HDMI or via optical (TOSLINK) out. If you have the component video cable, then the end that attaches to the Xbox has an optical out port. Simply attach this to the optical in on your home theatre receiver with an optical cable.
If you want to use audio via HDMI, in order to get surround sound you'll have to have an HDMI receiver capable of receiving audio. In this case run the Xbox via HDMI to the receiver and then the receiver via HDMI to the TV. The HDMI will send both audio and video.
If you have the official Xbox HDMI cable you can also connect the HDMI cable directly to the TV and use the optical out connector that it comes with instead.
Pug it into the the output socket
I don't understand why you would have Direct TV (sattelite) and cable TV? However, it depends on the input/output combinations of each component. I have my coaxial cable from my sattelite to the sattelite in jack on the sattelite receiver, the out to TV coaxial from the sattelite receiver run to my VCR plugged to antenna in on the VCR and a coaxial cable from the VCR to the TV coaxial antenna in on the TV. That way, you can watch sattelite without turning the VCR on, but the sattelite receiver has to be off to watch VCR or VHS tapes. Then, run video patch cords (red, white and yellow) out of the DVD to the TV (if the TV has those types of inputs on the back) If you want all three components (sattelite, VCR and DVD) to run through surround sound and NOT the TV, run only the yellow video cord from the DVD to the TV. Run the red and white to the surround sound receiver for each component. Your surround receiver should have multiple inputs for sattelite/cable, VCR and DVD.
Commercially sold television receivers have always included a circuit for sound. Historically, the first successful transmission of synchronized sound and video took place on 13 June, 1925 when Charles Francis Jenkins sent a 48 line mechanical system image of film and sound five miles in a test transmission.
Sound devices are devices for analog and digital audio products for radio, television, film, and music recording.
All sound output can and is measured in dB (decibel's)
If it is a digital TV, probably. Otherwise, no.
Connect your PS3 to your TV then connect you surround sound to your TV.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
Connect the digital audio output from the TV to the digital input of the surround sound receiver.
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
Connect the sound system to the AUDIO OUTPUT connectors on the back of your TV. If theses connectors are not there you will need to get a new TV with these connectors or if there is a cable or Satt. box, connect the surround to these.
If your surround receiver has HDMI, connect an HDMI cable from the NeoTV to the receiver, and then HDMI out the receiver to the TV. If you don't have HDMI on your receiver, you can connect an optical cable from the NEOTV to the surround receiver.
The TV set needs to have audio output connectors. If it has them connect the TV's outputs to RCA's inputs.
You can connect a sound system through your TV or the Sonystyle.com site has a new PS3 sound system for under $200 that was designed for the PS3
If your TV has a digital audio output, connect it to the optical or coaxial digital input of the surround receiver. This will pass through the digital audio signal sent from a HDMI input at the TV.
No, you will need a surround sound receiver or amplifier with 5 speakers and a subwoofer to hear surround sound.
If you are speaking of a 22-inch Dynex television, then yes. It will work. Note that the DVD/TV combo units had limited connection capability, so if you want to connect this type of set to a surround sound system, it must have a coaxial or optical digital audio output to send surround sound to a receiver.
I tried to do this and there is no way you can have surround sound on that tv.