0
coax television through a cable company in a home should not have any power on it if it dose it might be coming from a TV or a VCR or some sort of coax tuner on a unit
satellite on the other had dose run voltage on there line to work the dish properly
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Can you use any coax cable for satellite tv?
This would depend upon your TV and the receiver and if it has a coax port available on the back. You can use an RG6 coax cable between the receiver and TV. Most newer HD receivers do not have a coax port on the back
What size coax cable be used for cable television?
The best size is RG 6 coax. However for short runs RG 59 will work.
Can a coax cable work for cable TV but not a modem?
Actually, a coaxial cable is used for both modems and TV's.
Is rg6 coax cable the best to use for satellite tv in home?
For Dish Network, we use RG6 coax cable to allow a higher frequency range for the satellite signal from the dish to your receiver. Any coax cable not rated at RG6 could affect the signal.
What coax cable should be used for cable television?
RG-59/U and RG-60/U
Does Hitachi make a converter for their TV's sold in the Middle East in order to convert to US standard coax cable?
does toshiba make a convertor for there middle eastern sold tv to standard coax cable
What is the practical use of baseband coaxial cable?
Iam pretty sure that baseband coax was 50 ohm and was used for networking computer, were broadband coax is 75 ohm and used in the cable tv industry.
Where to get a tv cable?
You can get coaxial (coax) or HDMI cord online or at best buy or target.
What is the cable used for linking the satellite cable antenna to the receiver?
We use a RG6 coax cable from the dish to the receiver. The cable used between the receiver to the TV varies.
What do I need to do to watch cable tv without a box?
If you have analog cable TV, plug the coaxial cable coming from the wall plate directly into the back of your television. You should see a silver coax input on the back of your tv.
How do you hook up dish network to new TV?
Depending upon the type receiver you have, 3 options are available for connecting the receiver to your TV. With the VIP 211, 211k, 222, 612 receivers, you can use a coax, RCA, component or HDMI cable to connect to your TV; HDMI giving you the highest quality picture if you have HD programming. The VIP 222k, 622, 722, 722k, and 922 receivers allow you to use RCA, component or HDMI cable (K series receivers and 922 have a coax port with OTA module installed). All other receivers can use the coax or RCA cables. Connect the type cable you have from your receiver to your TV. If you are using a coax cable, place your TV on channel 3 or 4. Any other type cable, you place your TV on an Input setting - HDMI for HDMI cable; comp for component cable; or Vid, AV, etc. for RCA cable.
How do you hook your Xbox 360 up to your computer since the computer is hooked up to the tv and the sound system?
The only way to hook it up is to have a video card that has a coax input port. You will also have to have a converter to connect the 360 Cable and the coax cable too.
