Only if the curb stop was manufactured with a drain built in.
This type of valve is also known as a "Stop and Waste"
Replace the gasket with a fiber gasket.
Right near the curb
Curb Weight AT means the curb weight of the vehicle with an Automatic Transmission installed; Curb Weight MT means the curb weight of the vehicle with a Manual Transmission installed.
The "curb stop" is the valve that is on the service from the main into your house. i.e. The 8" main in the street has a saddle tap with your 3/4" service line on it. Within 8 ft of the connection between your service and the main is your curb stop. The curb stop is a valve buried underground. In order to open/close the valve a curb box is placed over the valve. It is essentially a metal tube that lets you open and close the curb stop.
The automatic does not have one. The pan has to be removed to drain the fluid. The manual should have a drain plug on the bottom.The automatic does not have one. The pan has to be removed to drain the fluid. The manual should have a drain plug on the bottom.
We stop at the curb because there were so cars
A yellow curb means that you cannot park at that curb. You can, however, stop at the curb to unload passengers or freight.
There is no drain plug.
The automatic transmission does not have a drain. You remove the pan to drain.
It does not have a drain plug. You have to remove the pan to drain.
The automatic does not have a drain plug. You remove the pan to drain.
You can never stop at a red curb. You can stop at a yellow curb but only to load or unload freight and/or passengers. You can not park in either of these zones.