0
Does a grandfather clock at the bottom of mountain run the same as a grandfather clock at the top of a mountain?
Wiki User
∙ 15y ago
yes
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you silence the chimes on a Waltham grandfather clock that has Westminster Whittington and St. Michaels chimes?
on my waltham grandfather clock, on the face there is a switch to silent the chimes as well as to select the different chimes.... it may be the same switch as my clock is located in a different location.
If at six o'clock the grandfather clock struck 6 times if it was 30 seconds between the first and last strokes how long will it take the same clock to strike noon?
66
How do you wind a grandfather clock?
If it's a cable driven, use a crank and place it in the keyhole and turn it. If it's chain driven, same way you'd wind a cuckoo clock, pull the end with the ring to raise the weight to the base of the clock.
What is the value of a Howard Miller Grandfather Clock Model 610-382 purchased in Aug 1987?
I just purchased that model clock from a seller on Craigslist for $1000. He said he purchased it several years ago from Costco, so it is probably the same clock.
How do I find out the value of a Baldwin Piano Company grandfather clock?
I have a Baldwin grandfather clock, model CB785. It was manufactured by Baldwin and Wurlitzer and purchased new in 1991. It's still gorgeous and works perfectly. Cost at that time was $838.73. May not be your same model but hope this helps.
How do you set up the alarm on an HTC Incredible S?
go to the clock and at the bottom there will be an alarm sign. Go to it. I had the same issue!
Where would you weigh the most at the beach at the bottom of a deep mine or on a mountain top?
You Would Weigh The Most At The Bottom Of A Deep Mine. Reason Being is that you would weigh the same on top of a mountain as mush as you would on a beach because your are on the ground and gravity affects you the same when your there.
How To Keep Your Grandfather Clocking At It’s Best With Regular Maintenance and Oiling?
Grandfather Clocks are always a special piece of furniture within a home. That is why they require special treatment when cleaning and oiling. These maintenance practices will keep your grandfather clock looking and operating at its best for many years to come. 1. The first thing that you will need to do before cleaning your grandfather clock is to gather the supplies and cleaners you will need to complete this project. This includes several soft lint free cloths or rags, a feather duster, furniture polish, a glass cleaner that does not contain ammonia and an oil kit. 2. You should dust your grandfather clock every week to keep it looking and working it’s best. Start by dusting the face and front of the clock and then open the panel to dust the inside using a gentle technique. 3. The glass of your grandfather cock should also be cleaned weekly using a glass cleaner that is free from ammonia and a soft cloth. Do not spray the cleaner directly onto the clock. Instead, spray your cloth an wipe down the glass. You will need to open the housing for the pendulum and clean this door first. You will then need to open the housing for the clock face if this option is available. Wipe down the inside completely. 4. Treat the wood of the grandfather clock the same as any other wood furniture You should wax and polish the wood once every two to three months using a furniture polish and soft cloth. Do not polish the clock face or get the furniture polish on the glass. 5. You should hire a professional to clean your grandfather clock every six to eight years. The professional will be able to clean and oil your clock using methods that you should not attempt without having extensive knowledge and training to perform. If anyone should clean the mechanisms of your grandfather clock who is not a professional, this will cause the warranty to become void and could lead to the clock getting ruined. 6. Using a special oil kit that can be purchased at clock stores, you can oil the inside of your clock once every two to four years. You will notice if your clock begins to get sluggish or starts losing time. This is a good indication that your clock needs to be oiled. 7. Take off the clock movement or dial to make it easier to reach the front plate. Place a small amount of oil on the intersection of the clock plate and gears. Be careful not to over oil. 8. Locate a small dip in the outside of the clock plate. This is called an oil sink. Fill this oil sink until it is half full of the clock oil. 9. You will need to start at the bottom gear of the clock and work up, completing five or six gear trains. There are some clocks that require as many as 35 areas that need to be oiled. 10. If you are unsure on whether or not you missed a spot, you consul the manufacturer’s guide that came with the clock when it was purchased.
Just bought a beautiful howard miller grandfather clock model 610-332 for 190.00. appears to work well. good deal?
We bought this same model in 1988 for around $600.00
Is a molecular clock the same as a biological clock?
Yes!
Why is atmospheric pressure less at the top of the highest mountain than at the foot of the same mountain?
For the same reason that water pressure is less three feet below the surface than it is 30 feet below the surface. On the ground (on earth) we are at "the bottom of the pool" - the air is heaviest there.
What is the value of a Howard Miller grandfather clock model 610-214?
I have the same clock. I contacted the HM company directly in 2010 to get information on it. They told me it was originally sold in 1986 as the St. Regis style. If purchased today a comparable style would cost $4,000.
