A low bandwidth signal does not have more power.
AS FREQUENCY INCREASE THE BANDWIDTH INCREASE. AS WE KNOW NOISE HAVE LARGER BANDWIDTH. SO ITS AFFECT HIGH FREQUENCY SIGNAL. BUT LOW FREQUENCY SIGNAL HAVE LOW BANDWIDTH SO IT IS LESS AFFECTED BY NOISE. ALSO WE KNOW QUALITY FACTOR= CUTOFF FREQUENCY / BANDWIDTH. SO AS FREQUENCY INCREASE B.W. INCREASE SO QUALITY DEGRADE. CUTOFF FREQUNCY AND THE TERM FREQUENCY (USED HERE) IS DIFFERENT. CUTTOFF FREQUNCY IS USED IN FILTER. PRABIR KUMAR SETHY prabirsethy.05@gmail.com
The bandwidth of a signal is related to how fast you can transmit information over that signal. Signals with large (or broad) bandwidth can transmit more information (data) in a given amount of time, so this results in faster download times.
It will be dissipating more power than a small signal diode.
One advantage is more bandwidth. A disadvantage is that the transmitted power is lower.
The power of the signal, as perceived by the receiver, will be lower with an omnidirectional antenna. This is because the omnidirectional antenna is transmitting in all directions, while the directional antenna is transmitting in only one direction.Think of the directional antenna as a lens, focusing proportionally more power in a smaller space.
no,because generally the lower frequency side existed for lower bandwidth,and higher frequency side existed higher bandwidth,so thus we can say that lower bandwidth has generally has lower power as compared to higher bandwidth.
The forth generation of wireless technology offers increased bandwidth, mobility and the signal's range. Increasing the signal power, a device requires more electrical power that will be consumed during signal transmission.
AS FREQUENCY INCREASE THE BANDWIDTH INCREASE. AS WE KNOW NOISE HAVE LARGER BANDWIDTH. SO ITS AFFECT HIGH FREQUENCY SIGNAL. BUT LOW FREQUENCY SIGNAL HAVE LOW BANDWIDTH SO IT IS LESS AFFECTED BY NOISE. ALSO WE KNOW QUALITY FACTOR= CUTOFF FREQUENCY / BANDWIDTH. SO AS FREQUENCY INCREASE B.W. INCREASE SO QUALITY DEGRADE. CUTOFF FREQUNCY AND THE TERM FREQUENCY (USED HERE) IS DIFFERENT. CUTTOFF FREQUNCY IS USED IN FILTER. PRABIR KUMAR SETHY prabirsethy.05@gmail.com
In FM noise is low as compared to AM. The AM signal covers more distance than FM signal that's why it gets more distorted.How ever the information in AM signal does not lose but the noise effects it more than that of FM signal,so we get signal with more noise than that of FM signal For FM Carson's rule Main article: Carson bandwidth rule A rule of thumb, Carson's rule states that nearly all (~98%) of the power of a frequency-modulated signal lies within a bandwidth of where , as defined above, is the peak deviation of the instantaneous frequency from the center carrier frequency . Noise quieting The noise power decreases as the signal power increases; therefore the SNR goes up significantly. Thanks, By tauseef ahmed
Bandwidth is something like a space; bandwidth is proportional to the signal rate. if the signal rate is low then the bandwidth is high and vice versa. bandwidth carry the amount of information in a specific time period.For example if 1 person travel in 1 car then bandwidth will increase or if 4 person travels in 1 car then bandwidth will decrease. :)
The biggest difference between high and low bandwidth is latency. The lower the bandwidth the more time the computer spends trying to download the data.
The bandwidth of a signal is related to how fast you can transmit information over that signal. Signals with large (or broad) bandwidth can transmit more information (data) in a given amount of time, so this results in faster download times.
The two major advantages are the signal takes 1/2 the bandwidth and it allows more of the power to be applied into the narrow band thereby increasing strength.
You can make a download (sometimes) increase in speed by allocating more bandwidth to the download. Right click on the torrent and there should be a bandwidth option. Set this option to high bandwidth.
It will be dissipating more power than a small signal diode.
network administrator
Because voice communication uses more information to reproduce the person's tones and qualities over the line. Data is a digital signal composed of 1 & 0 - needing much less bandwidth.