0
Does an car engine need to be supported with a hoist while the motor mounts are changed?
Wiki User
∙ 13y ago
Either a hoist or a jack under the sump.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How to install motor mounts for 1976 corvette 350 stock?
One way to do it is with an engine hoist. Loosen and remove the through bolts in the motor mounts. Carefully raise the engine with the hoist until you have enough clearance to unbolt and remove the engine mounts. You must be careful and work slowly when raising the eingine, though.
How do you change motor in Honda Prelude si 4ws?
unbolt motor mounts use engine hoist
How do you change the motor mounts on a 2004 Ford Taurus with a V6 engine?
I am still waiting for an answer. The book says on 1999 and newer Taurus's the engine and transaxle must be removed underneath the vehicle to change motor mounts. You will need a hoist and engine cradle. Big Job! Check with a proffessional.
Does the engine need to be lifted to replace the oil pan on a 1998 Plymouth Voyager?
Yes. You need to unbolt the exhaust pipe from rear manifold and support engine and transaxle from above with engine hoist. Unbolt engine mounts and raise engine/transaxle to make clearance to remove oil pan. This is for V6 3.0 L engine. Yes. You need to unbolt the exhaust pipe from rear manifold and support engine and transaxle from above with engine hoist. Unbolt engine mounts and raise engine/transaxle to make clearance to remove oil pan. This is for V6 3.0 L engine. A little bit different for 4 cylinder. Yes. You need to unbolt the exhaust pipe from rear manifold and support engine and transaxle from above with engine hoist. Unbolt engine mounts and raise engine/transaxle to make clearance to remove oil pan. This is for V6 3.0 L engine. A little bit different for 4 cylinder. Yes. You need to unbolt the exhaust pipe from rear manifold and support engine and transaxle from above with engine hoist. Unbolt engine mounts and raise engine/transaxle to make clearance to remove oil pan. This is for V6 3.0 L engine. A little bit different for 4 cylinder. Yes. You need to unbolt the exhaust pipe from rear manifold and support engine and transaxle from above with engine hoist. Unbolt engine mounts and raise engine/transaxle to make clearance to remove oil pan. This is for V6 3.0 L engine. A little bit different for 4 cylinder.
How do you change a oil gasket on a 2001 Chevy impala?
You will need to hoist the engine out about 12 inches to clear the crankshaft and then you should be able to wiggle the pan out. You need an engine hoist and you will have to unbolt the engine and trans mounts, while the engine hoist is attached with chains to the engine. You will also need to unbolt the the cv joints, but this is no easy job, so get a Hanes manual for your car before you begin. You can get a copy of many auto repair manuals from the library and use it for just this job at no cost to you.
Engine Hoist Rental?
form_title= Engine Hoist Rental form_header= Safely raise and lower your engine when working on your car. What size engine do you have?*= _ [50] Do you need an engine stand?*= () Yes () No How long do you need the hoist?*= _ [50]
What class lever would an engine hoist be?
no
How do you change a engine mount on punto 2001?
You need an engine hoist (or a come-a-long wench). Hook up the hoist chain to the top of the engine and tighten slightly. unbolt the engine mounts and lift the engine far enough to clear the motor mount brackets. Replace the mounts, lower the engine, tighten the mount bolts and you're done. The Fiat Punto looks like a 4 cylinder front wheel drive. So disconnect the battery and any hoses/wires or parts that may block, snag or damage while attempting this operation. remember where they go and replace them when you're done. Haynes or Chilton Automotive books at your local auto parts store will give you step-by-step instructions.
Unable to remove oil pan from a 1991 Mazda Miata undercarriage?
You'll need to loosen the engine mounts. Then use a jack to lift the engine to for the clearance you need. This can be extremely difficult depending on how much room is provided and the tools you have. You may need lift the engine with a hoist if you aren't able to place a jack underneath to rais the engine.
How do you remove engine 3.0 escape?
I would suggest using Google to find this answer. but a quick summary would be: disconnect battery remove all wiring connected to engine drain engine oild drain radiator fluid drain tranny oil ( if comming off as a separate peice) remove intake remove all house connected to engine Unbolt all the engine mounts and tranny mounts using an engine lifter, hoist the engine out of the engine bay repeat the steps backwards to install engine don't forget to replace all the engine fluids that were drained!
How do you remove 1998 Honda civic automatic transmission?
Removing the transmission on a 1998 Honda Civic takes time as it engine will need to be remove as well. The engine mounts will need to be removed, coolant drained, hoses removed and shift linkage removed. When everything is properly loosened, using an engine hoist, lift the motor out. Disconnect the transmission from the engine and replace the unit.
How do you remove a 89 caprice oil pan?
remove the bolt in the motor mount. and remove the bolt to the trans mount. then lift the engine with a engine lift, hoist point should be around the intake man near the ac compressor you should be able to get it from there or you might need to loosen both motor mounts
