No, it doesn't have it.
Yes you can. To create a wireless home network, youâ??ll need both a router and a modem, or a gateway that functions as both
A Cable/DSL gateway is a network gateway. It is used to establish a connection between DSL and Cable TV to a computer network by physical means, such as through LAN or a wireless network.
The Gateway 7330GZ Notebook has a built in Gemtek 802.11g Wireless Card.
A wireless gateway is a computer networking device that routes packets from a wireless LAN to another network, typically a wired WAN. Wireless gateways combine the functions of a wireless access point, a router, and often provide firewall functions as well. This converged device saves desk space and simplifies wiring by replacing two electronic devices with one.
Yes its possible, just enable ICS and and provide IP address to wireless router as follows IP 192.168.0.5 Subnet 255.255.255.0 Gateway 192.168.0.1 DNS 192.168.0.1 And use normal lan port of your router to connect ICS PC instead of WAN port.
You need a router. The cable modem connects to the modem's uplink port and the switch can connect to any available port on the router. This wll enable any computers connected to either the router or the switch to access the internet. Through a Wireless Access Point/Gateway/Router. U can connect ur switch w/it's 5 wired pcs to the Router and ur wireless pcs to the router.
A wireless gateway is a way where one uses to expand the coverage of wireless connectivity by making use of another router. This can be used to expand coverage in an area.
If you have ping to the gateway in doesn't mean that a remote host has connection.
First, don't install the software that comes with the router. This is very important. Simply power up the wireless router. Once powered up, search for the default name for the router in the list of wireless connections. For Linksys, the network is named Linksys by default. You can change this later. Once connected to the router, you will be assigned an IP address. From the cmd window (Windows->Run->CMD), enter ipconfig. You should see the IP address as 192.168.1.101 (at least this is what Linksys starts with. The gateway listed below is the address for your wireless router. To connect to the wireless router, you can now enter the "gateway" address as described above into a browser window. Keep in mind that if you change the name of the wireless network name, it will disconnect your laptop from the network. This is ok. Just find the new name in the available networks and reconnect. Other laptops can connect too. They will be assigned a new IP address after they connect. For some reason, tech support for Linksys believed that an Internet connection was needed for their wireless router. They are clueless. Follow these instructions and you'll have your wireless LAN up and running in no time.
what should i get to have wi-fi on my sx serries gateway desk top
The original configuration of the Gateway SX2110G-UW24 did not include wireless networking. If your model has a wireless networking device, make sure the drivers are installed and updated from the Device Manager tool.