First, don't install the software that comes with the router. This is very important. Simply power up the wireless router. Once powered up, search for the default name for the router in the list of wireless connections. For Linksys, the network is named Linksys by default. You can change this later. Once connected to the router, you will be assigned an IP address. From the cmd window (Windows->Run->CMD), enter ipconfig. You should see the IP address as 192.168.1.101 (at least this is what Linksys starts with. The gateway listed below is the address for your wireless router. To connect to the wireless router, you can now enter the "gateway" address as described above into a browser window. Keep in mind that if you change the name of the wireless network name, it will disconnect your laptop from the network. This is ok. Just find the new name in the available networks and reconnect. Other laptops can connect too. They will be assigned a new IP address after they connect. For some reason, tech support for Linksys believed that an internet connection was needed for their wireless router. They are clueless. Follow these instructions and you'll have your wireless LAN up and running in no time.
what is intermediary device
One of the routers you have to connect to internet, another one you have to connect to the first one using a lan cable. You can use any of lan ports of the first router to connect the second one (except internet port, usually it's marked as WAN or similar to). The lan cable should be connected to the WAN port on the second one. Only in such case it works properly.
yes a connection of computers. this is called the internet. every person who has internet acess has connected over the whole world. this means you can share info and do research for school. but the bad thing is some people put viruses on websites and programs from the internet. this is why you also have to get anti-virus protection. Another term is LAN. Local Area Network. This is different from the internet.
All IPv4 IP addresses can be divided into two major groups: global, or public, or external - this group can also be called 'WAN addresses' — those that are used in the Internet, and private, or local, or internal addresses — those that are used in the local network (LAN).
between an ISP and a home-based LAN
If you have a LAN you can allocate an IP address . If you have a internet connection your IP is usually allocated to you by your ISP
Skyrim is a single player game, there is no multiplayer mode, LAN or otherwise.
The first XBOX has a (Cat) LAN Connection and a wireless addon. The first XBOX 360 has a (Cat) LAN Connection and a wireless addon. The first XBOX SLIM has a (Cat) LAN Connection and built-in wireless.
Answer: purchase high speed internet connection brodband. use two lan card on this PC. and one lan card connect directly internet connection wire. and another lan card wire connect in swith and share internet connection and then use.
what is the fastest download manager?? my internet connection is LAN. there fore this software must be support for proxy.
WAN. LAN is a short range connection, WAN is wide range.
Your LAN will need a router and a definition of the default gateway pointing to that router. The router will need an internet connection as well.
When i start lan play and start to create server after it an error appear your lan connection has been lost
It is possible to play over a LAN connection (ie. though ethernet cable connections between the PCs)
It depends on your computers connection to the internet.
You did not put your Ethernet cable in the LAN port on the router.
no need of telephone line for LAN networking. for LAN we ethernet card and other networking devices like hub, switch. for internet connection u need telephone line A Lan is a shared network of multiple systems. You can have a LAN which does not have Internet access and only supports Print/File Sharing. You need one router to assign IP addresses using DHCP and if more connection are required, just add switches. To give the LAN Internet access, you need an ISP connection and a modem. The existing router then connects to the modem. The ISP connection (today 2008) can be DSL, FiOS (over a phone line) or Cable. A dial-up connection can be shared on a LAN, but today that is a very poor choice and would not be connected as described above.