The intake is 0.001 to 0.003 & exhaust is 0.003 to 0.005 w/cold engine. The head bolt torque is 27.5 lb.ft and the cylinder base/head nuts are 7 lb.ft
This info is from a 2005 service manual but should be the same for yours.
Sourced from motorcycleforums.net after about 15 seconds of work.
don't be lazy. search bars are your friend. you're welcome.
29,40,51 lbft
I think there is no torque required for the valve cover as long as all are evenly tightened or the seal is flat on the cylinder head it will not cause any leak. If you have tightened the valve cover screws already and there are still leaks you might want to consider putting silicone on the valve cover gasket before you attach it or you might want to consider buying a new valve cover gasket.
The vehicle manufacturer will quote a torque figure for the EGR valve but in practice most mechanics no not torque them.
The head bolt torque for a 1998 Suzuki Esteem with the 1.6L 16 valve engine is: 1st: 25 ft lbs 2nd: 40 ft lbs3rd: 48-51 ft lbs
valve cover torque 98 nissan2.4
The torque converter solenoid is inside the transmission on the valve body.The torque converter solenoid is inside the transmission on the valve body.
89inch pounds is the torque rating for the valve cover bolts
0.10mm
The EGR valve on a 1998 Suzuki Sidekick is not repairable. It has no replaceable or user serviceable pieces or parts.
kindly provide me the tappet clearance for Suzuki fa engine. thanks, lito
torque to 96-110in/lbs
What is the valve clearence for a 1985 lt 125