0
No. it does not. breaker bar with 19mm socket wedged on the frame rail hit the starter a few times. good luck not smashing up your thrust bearing. read this http://mazdatrix.com/faq/pulley.htm
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Are the threads on the crank pulley left or right handed on a 1989 Ford Festiva?
the crank pulley bolt has standard threads.
Are the threads on the bolt left or right thread where it goes through the harmonic balancer and in the crank on 1974 Chevy 350 c you engine?
They are standard right hand threads.
Is a crankshaft bolt for a 2000 camaro z28 right hand or left hand threads?
It is right hand tread.
Are the threads right or left hand on 1997 regal harmonic balancer bolt?
Right handed.
Is a 1996 Isuzu rodeo 3.2 crank shaft pulley bolt left hand threaded?
No
Is Honda Civic 1.6 2004 crank bolt left or right hand tread?
Regular right hand thread.
Will left hand bolt thread into right hang hole?
no it wont sort of answers itself with opposite threads
Is the crank bolt on a 3l dodge motor right hand thread or left hand thread?
Righty tighty, lefty loosey.
How do you remove trans pulley 1991 softtail is the locking bolt clockwise or counter?
Left hand threads clockwise to loosen
How do you get the bottom Alternator bolt loose on a 1998 Pathfinder 2wd are the threads back wards?
Some imports have a adjuster that is under the pivot bolt...check this.Also there may be a nut on the back side that is spinning. The threads are not left hand.
Is a crankshaft bolt for a 2000 Grand Caravan right hand or left hand threads?
if you mean the one on the front holding on the damper its right.its just real tight
Which way do you turn the bolt on the axle that holds the drum and rotor on?
RIGHTY TIGHTY - LEFTY LOOSY - unless its has backwards threads (left hand)
