0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the best way to spread tile grout?
You need a float brush and grout. You want to make sure you have the right kind of grout. For example, you might want a sanded grout for larger grout spaces. Apply the grout with the float at a 45 degree angle, wiping as much off as you go. After it sets, use a sponge to wipe the haze from the tiles.
What is a cheap chemical that is good for cleaning grout and tile?
How do I go about doing my own grout and tile cleaning? I need a cheap chemical.
When you installed the grout after pressing all the seams your son cleaned up for you he used a rag mop and ended up with low spots can you just wet it and go over it again 0 in to 1 8 in to level it?
It depends on the type of grout you used. Typical cement-based grouts cannot adhere to existing grout in lines of less than 1/8" deep, and it's advisable to remove all the grout and do over. If your grout is an epoxy-based grout, or some varieties of pre-mixed grout, it might be possible. Check the label to see if it adheres to existing grout, and at what thickness.
Tile Grout?
form_title= Tile Grout form_header= Give your home a face lift with new tile grout! Do you want to install new grout?*= () Yes () No () Not Sure Do you want to clean out old grout?*= () Yes () No () Not Sure What color do you want the grout?*= _ [50] How old is the grout in your home? *= _ [50]
What type of grout for bathroom tiles?
if your grout line is less than 1/4" you use smooth grout, above that you use sanded grout.
Best way to replace grout?
The old grout can be cut out. The mist efficient way is with an oscillating tool with a grout blade. After the old grout is removed then new grout can be installed. This is a time consuming project.
Is tile and grout toxic?
Grout is not toxic. Grout sealers and adhesives can be toxic but not the grout itself. Tami Barker www.mosaicforms.com Mosaic Art Instructor and Creator
Will using both sanded and unsanded grout on your back splash look okay if you have both 1-16 in and 1-2 in gaps to grout?
You should use the grout that will work best for the biggest grout space that you need. So for a grout width like you described, 1/16 to 1/2, you should use sanded grout. Unsanded grout will look terrible in a 1/2" grout joint, but sanded grout will look great in both. Use sanded.
What is the meaning of GP2 Grout?
GP2 means Grout in Powder form EP10 Epoxy grout in powder form
Can you put an acid wash on ceramic floor tiles to change the color?
Color of what grout lines? I wouldn't grout colorant (only aquamix) works good for that if grout is not sealed.A far as ceramic tiles go Ive never seen a kind where acid will do anything good.
Why did my brown grout dry white?
All grout dries lighter when dry.but brown grout should not dry white. Check the date of; it might be passed its shelf life. look and see if you bought a light brown grout. You could cut the grout out with a grout rake but this would take ages
When did Jonathan Grout die?
Jonathan Grout died in 1807.
