0
6to4
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Which version ios support ipv6?
IPv6 support was first supported in IOS version 12.2T, which was the beta version of 12.3. You need to install the Advanced IP Services to get IPv6.
What type of address mechanism is a tunneling protocol that enables computers to transmit IPv6 packets through NAT routers that do not support IPv6?
Teredo
What version of RIP do Cisco routers support?
Both 1 and 2. Also, RIPng (for IPv6).Both 1 and 2. Also, RIPng (for IPv6).Both 1 and 2. Also, RIPng (for IPv6).Both 1 and 2. Also, RIPng (for IPv6).
Does Windows XP support IPv6?
Short answer - yes.You need to be running Service Pack 1 at a minimum.Service Pack 2 has an even more complete IPv6 stack.To enable IPv6 on XP, open a command prompt window and type:C:\> ipv6 /?Did you then see this result?:C:\> ipv6 /?Could not access IPv6 protocol stack - the stack is not installed.To install, please use 'ipv6 install'.If you did get the above result, simply type:C:\> ipv6 installIt will take a few seconds, and then your Windows XP system will be fully IPv6 enabled.
Which version of Linux supports IPv6?
All versions of the Linux kernel since 2.0 support IPv6. Most modern distros have IPv6 enabled, but as there are over 300 different distributions, it is impractical or impossible to list all of them.
How has DNS been modified to add support for IPv6?
1. A new DNS was created to allow a domain name to be associated with a 128-bit IPv6 address.
What is IPv6 and when will it be used?
(Internet Protocol) IPv6 is the next step from IPv4. Currently we are not using IPv6 for our networks but soon it will implemented into our networks normally. IPv6 uses 128 bit spaces for its ip addresses were as IPv4 only uses 32 bit spaces. That means IPv6 can support 2128 addresses. I do not think we will run out of addresses with this version anytime soon.
How do you upgrade IPv4 to IPv6?
You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.
What are the uses of ipv6 for commercial?
what is the commercial use of ipv6?
What is the difference with G vs N routers?
Different transfer information speeds, and support of new technologies like IPv6.
What is the length in bits of a logical IP address IPv4 and IPv6?
32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).
What must you use to span the gap in IPv6 support and access the IPv6 Internet?
IPv6 is not a separate Internet. It is a separate type of address. Machines can have both IPv4 and IPv6 addresses simultaneously. Many web servers already do this, and nearly all of the Internet's backbone routers have both types of address. Theoretically, if you are using IPv4 or IPv6, your data will take the same path, across the same hardware, to its destination. However, you may not be able to get an IPv6 address from your Internet Service Provider, perhaps since they are not yet IPv6-ready (often the case with smaller ISPs). In this case, you can setup a 6-to-4 tunnel which connects your IPv6 network inside your home to the IPv4 network of your ISP. Presumably, that ISP will also have a 4-to-6 tunnel allowing your packets to make their way to the IPv6 destination. That being said, if you know the IPv4 address of the same server, you can just use that without the need for IPv6. Only in the rare cases where servers only have an IPv6 address do you need to ensure that your packets come from an IPv6 address, then travel to the destination somehow (directly across an IPv6 network, or using tunnels as described above).
