Want this question answered?
time(seconds)=1/frequency(Hz) time=1/50 =0.02 seconds for 1 cycle
CPR for a infant is the same as a adult now; 30 compressions to 2 breaths (compressions given at a rate of 100 compressions per min). Each cycle of 30 compressions / 2 breaths should take 24 seconds.
One must be careful when performing infant CPR. If the child is not breathing compressions are done between the nipples at a fast rate. The ration of compressions to breaths is 30:2. This should take approximately half a minute per cycle.
Giga means 1,000,000,000 cycles per second. Therefore 1/1000000000 seconds per cycle, or 0.000000001 seconds in a cycle.
Learn CPR You will learn the basics of how to respond to an emergency situation and what to do to potentially save a life. You will be able to practice performing life saving skills.
Do not stop CPR until one of the following conditions exist: * An AED becomes available, and you stop to install and allow it to analyze and further direct you * More advanced medical personnel arrive to take over (or another trained person) to continue CPR and to transport * The scene becomes unsafe, and you need to move the patient and yourself to safety; then continue CPR * The patient shows signs of life * You are too tired to continue.
period is the time duration of one cycle of the waveform, and is measured in seconds/cycle. AC power at 50 Hz will have a period of 1/50 = 0.02 seconds/cycle. A 60 Hz power system has a period of 1/60 = 0.016667 seconds/cycle
Maryland Holiday Inn Express is a good option for a CPR course in Baltimore as well as CPR certification. It is pretty easy to find CPR classes in Columbia as well.
0.8 seconds
We clearly heard you say "one complete cycle every 2 seconds". That means that the period is 2 seconds. No calculation or arithmetic of any kind is needed.
After the switch is turned off the wiring is safe inside one cycle, that is 0.02 seconds or less.
Lead time is typically used to specify how long the delivery of a piece of equipment will take from purchase order to delivery. Cycle time is the amount of time measured in seconds or minutes a piece of equipment operates at. This is measured from the start of one cycle to the start of the next cycle.