A rope is not used in any electronic circuit, because it is made of insulating material that is very hard to control and characterize.
A simple circuit is a basic, simple and complete path through which electricity can flow.
*Look at the simple circuit illustrated in Figure A-2. What will happen when only switch S1 is closed? Correct Answer= "Nothing will happen-the light bulb won't light up." <<>> If there is a load in the circuit the load will operate. If there is no load in the circuit and it is complete then a short circuit will occur and something in the circuit will burn open. If the circuit is complete and there is a fuse or breaker in the circuit, then the fuse or breaker will open the circuit.
A simple circuit consists of a power source (such as a battery), a load (such as a light bulb), and wires connecting them in a complete loop. When the circuit is closed, the power source provides electricity to the load, causing it to operate.
-- power supply -- power-dissipating component -- connecting conductors
A simple complete circuit must have a power source (like a battery), a load (such as a light bulb or motor), and connecting wires to link the components. The wires allow electric current to flow from the power source to the load and back, completing the circuit. If any part of this circuit is broken or disconnected, the flow of electricity stops, and the load will not function.
Rope is not a simple machine on its own, it's a simple machine on a wheel and axle, then it's a pulley.
The circuit may not be complete. The power source may not be sufficient. The polarity of the battery is messed up.
In the simplest form; The difference between a complete and incopmlete circuit is... Complete means that electricity CAN and WILL flow through it where as with an incomplete circuit does not have the ability to conduct current is broken... Here is an example. -----/----- Incomplete cicuit, something preventing electricity to flow ----------- complete circuit, electricity can flow.
The power dissipated by the complete circuit, no matter whether it's a series or parallel one, is the simple sum of the power dissipated by each component of the circuit.
When a Crane wire rope deteriorates its called Complete rope core failure.
An open circuit or a short-circuit (if that circuit is complete).
Current flows through a complete circuit.