0
What else can I help you with?
Where does the steel go after it melts?
where does the steel go befor it melts
How can you melt a galvanized nail?
well galvanized metal is nothing more than zinc coated steel. Zinc melts at 787.1 F and steel melts at roughly 1200 F depending on the quality of the steel. So yes you can melt a galvanized nail.
What is the temperature of welding arc to weld metal?
Depends on the metal, but for steel it is hot enough to melt the steel- and steel melts at 2600-2800 degrees F.
Is a steel a solid liquid or gas?
steel is all three. when it is heated it melts into a liquid. if it is heated even more it evaporates into a gas. if gas steel is cooled it condenses into liquid steel and if liquid steel is colled even more it hardens into a solid again
How hot can steel get before it reaches its melting point?
Steel typically melts at around 2,500 degrees Fahrenheit (1,371 degrees Celsius).
Are there any steel or iron that can not melt.?
The short answer is NO. Pure iron (Fe) melts at 1535oC, steel is an alloy (mixture of iron (the greater) and carbon plus other elements) and melts over a range depending on the composition of the steel made and is in the order of 1400oC plus. This a simplistic view, but in the right ball park. Hope this helps
How do you cut steel with an electric arc?
you use carbon electrodes in a electic arm holder that creates a arc at the bottom and melts any steel that comes through it.
Is it good to say mile steel melts at 1500 degree celsius?
Each steel has another melting point; this temperature is approx. 1 200 0C.
What is the Steel melting point?
It depends on the type of steel. Steel is not one particular thing, there are different steels for different purposes. Between 1100 - 1300 ºC
What is the melting point for AISI 4130 Steel?
AISI 4130 steel, also known as B.S CDS 110 steel, melts at between 1370 and 1400oC.
What temperature melts steel?
It depends on what steel it is.There is Carbon steel and stainless steel (And perhaps others, but these are the main divisions).Carbon steel has a melting point of 1425-1540 degree centigrade (2600- 2800 degree Fahrenheit).Stainless steel on the other hand has a melting point of about 1510 degree centigrade (2750 degree Fahrenheit).== == Steel often melts at around 1370 degrees C (2500 °F). This varies depending on the specific steel alloy. The specific heat of steel varied from 420J/KG/Deg C at room temperature to 720J/KG/Deg C at 1535 deg C. This equates to a theoretical heat requirement of approximately 375KWh/mt to melt steel from room temperature. In practice, foundries use between 500 and 800 KWh /mt to raise steel to a little above its melting point of 1535deg C.
What type of change is melting steel?
The simple act of melting the steel is a physical change. No one melts steel out of boredom. If the melt is so you can add other elements to it, then you've made a chemical change. If you're forming useful products from the steel without changing its chemistry, it's a physical change.
