If it is anything like an Altima, one fan is for engine cooling and the other works with the air conditioning system.
On a 1997 Ford Aspire, the oil filter is located on the underside of the engine, near the oil pan. To access it, you'll typically need to raise the front of the vehicle. The oil filter is cylindrical and can be found toward the front of the engine block, making it accessible for replacement during an oil change.
The thermostat on a 1997 Ford Aspire is located on the engine, specifically at the end of the upper radiator hose where it connects to the engine block. To access it, you'll need to remove the upper radiator hose and the thermostat housing, which is typically held in place by bolts. Make sure to drain some coolant before starting this process to avoid spills.
In a 1997 Ford Aspire, the fuel pump fuse is located in the fuse box, which is typically found under the dashboard on the driver's side. You can identify the correct fuse by checking the diagram on the fuse box cover, as it will indicate the specific location and amperage of the fuel pump fuse. If you need to replace it, ensure the vehicle is turned off before doing so.
Need to replace computer on 1997 ford explore. Need to know location of computer?
if u cant get a locksmith to get u a key, u may have to go to the ford dealership. if u already have a key, but u need a spare, just take it to wal-mart. they should be able to help u also.
On a 1997 Ford Aspire, the fuel filter is located under the car, along the frame rail, near the fuel tank. It is accessible from beneath the vehicle, so you'll need to raise the car safely to replace it. The hood open does not provide access to the fuel filter, as it is not located in the engine compartment. Always ensure to relieve fuel system pressure before attempting to replace the filter.
You need an OBD II scanner, it plugs in under the dash, most auto stores like auto-zone will do it for free. Check out this web page, it seems pretty good. Hope this helps. http://www.troublecodes.net/Ford/
yes and no... all aspire suspension parts front and rear will bolt directly to the festiva body... however the parts are not the same so you have to change the entire structure over to aspire suspension.. the 2 cars share a few individual parts like axle beam and various nuts and bolt. the aspire and festiva also have different wheel lug patterns so you need to have aspire wheels also and spare.... so if you change only the front or only the rear you will need to carry 2 spares.
If a vehicle, manual or automatic, does not shift into a certain gear, there may be a problem with that gear. Gears get worn and need replacing in a vehicle's lifetime.
On a ( 1996 ) Ford Aspire : With engine oil filter change : The 1.3 liter / 81 cubic inch four cylinder engine takes : ( 3.6 U.S. quarts / 5W-30 is the PREFERRED oil according to the Owner Guide )
In a 1996 Ford Aspire, the blower motor is typically located under the dashboard on the passenger side. To access it, you'll need to remove the lower dash panel. The blower motor is mounted to the heater box and can be identified by its round shape and electrical connector.
R134a