Want this question answered?
its located in the back of the motor.
Where is back up alarm located
Assuming this is for the V6, Bank 1 refers to the bank of cylinders toward the back of the engine compartment, near the firewall. Bank 2 is in the front of the engine compartment. Sensor 1 is the top sensor on the exhaust manifold right before the pre-catalytic convertor. Sensor 2 is the sensor after the pre-cat and before the exhaust merge.
You must press 5 second on your remote desalarm
Highlander - 1992 Take Back the Night 3-17 is rated/received certificates of: Argentina:13
im assuming its a 3.0 V6. bank2 sensor is on the exhaust manifold, in front, easy to see and take off. it looks exactly like a O2 sensor but its called a air/fuel ratio sensor. bank 1 sensor is in the back against the firewall but below, on the exhaust manifold. you cant see it from the top. try going from under. i never did it myself, but did trouble shoot these problems.
The 2003 Cadillac Escalade back up alarm fuse can be found in the fuse box. The location of the back of the alarm fuse will be listed on the inside cover of the fuse box.
if you have a hatch back you can deactivate alarm system by placing key in hatch back and simply openning door
yes it is underneath the back of the car.
it was leaking so they had to return to get it fixed On the second attempt they had fitted on it a 350 MAG and didn't make it either because of a failure of the water pressure sensor. The alarm came off and because the skipper couldn't stand the sound they had to go back and had the sensor replaced.
First, unscrew the bottom and switch the "mode lock" to ON. Press the "mode" button on the back of "Bob" until you get to the alarm. Then simply press and hold the Up arrow.
In the reverse method of the way you took it out.