Want this question answered?
the only zerks are on the upper ball joints.
Where are the grease fittings on a Chrysler 300 front end
Well I had a grease fitting for a Chrysler 300 on the front end
Factory units are not greasable
First thing to do is to have the wheels balanced.. If that don't fix it, have the front end aligned, and they will tell you if it needs tie rod ends or other front end parts. HTH, Chuck
plug on pumpkin on front of rear end on passenger side
From the factory, it is sealed. Some non-OEM replacement parts do have grease fittings.
Unless steering or suspension parts have been replaced - most likely a sealed (no grease fittings) system
Depending on year, it came with 11 or 2 or 4 or 8 or 0. Repairs to front end and/or driveshafts may have added additional grease fittings.
Some front end parts may not have grease fittings, they are lubricated for life.
yes
There is 11 grease fittings in the front end parts. You have 1 fitting in the front driveshaft, could have 1 in each u-joint. There may be fittings in the rear drive shaft too. There is 11 in the front Suspension for sure, and that is not counting the driveshafts.