Yes it comes with a USB cable that can charge the controller, but only when the PS3 is on. Some people purchase additional controllers and a separate charging station for multiple PS3 controllers so that they are ready to play and at full power. The setting on the PS3 also need to be set to turn the controllers off when not being used or they will be out of power when you want to play and must be played using the charging cable. You can also purchase longer charging cables to enable you to play further away from the PS3 when they need to be charged.
The PS3 controller does not need a charger. Just purchase a Sony PS3 cable and plug into any USB port. Mine is plugged into my Sony HDTV
ur supposed 2 have an usb cable thus that's how u charge it? ---- *Improved* The PS3 comes with a controller charger. It is a USB cable and hooks right into the controller and system. *Proof* I Have a PS3.
The average price for the power charger stand on a PS3 is around $8.99.
Yes.
You only need a cable and a USB plug
It should sinc if you push the PS button, but if not you can plug the controller into the playstation with the charger and then try againIf the controller is being connected for the for the first time and is not an official Sony ps3 controller and it is a ps3 compatible controller, connect the controller with a USB cable to the ps3, then under settings> device settings> register new device. This is how it works for Wired and Wireless headsets for the ps3 too.This sectional guide answer was modified by TechnoFixunder 'Modified for a wider understanding'.
Usually if you plug the usb cable (controller charger cable) into the ps3 console and the ps3 wireless controller it will sync the controller with the console. I had this problem when I went to a friends house and brought my extra controllers. The Controllers just set there and blinked till I plugged it into his usb cable that hooked up to his ps3 console. Hope this helps
No it's just designed for wirelsss controllers.
To reset a PS3 controller to a different PS3 connect the controller to the PS3 you want to connect it to with a charge cable. Press the PS button and wait for it to connect to the new console. After it connects your controller will now work with the new PS3.
To register your Sixaxis/DualShock 3 PlayStation 3 controller with your PlayStation 3 system after it has been used with another system, simply connect it to the PS3 with a USB cable and press the PS button on the controller to sync it. Your controller will now work again.
You can use a charger for the PS3 controllers, but the USB cord for the PS3 controllers works as a charger.The chargers they sell plug into the wall and not the PS3 USB ports. I also use the USB on my TV to charge my controller because it does not shutoff when the PS3 is off and purchased extra Sony PS3 USB cables to enable me to charge more than one controller
No controller is made different and charging connection is in a different spot on ps4