Want this question answered?
What is the standard bore size of a 1987 suzuki rm250 1987
Displacement in cubic centimeters/refers to piston bore size.
3.68 bore x 3.126 stroke
Over Size
82MM is standard bore and 71.2MM is the Stroke
3.740 x 3.480 / inches. Stock factory bore.
what is the piston displacement of a compressor with 2" bore and 3" strokes
The bore and piston size are the only real difference between the two.The 350 has a bigger bore and piston and so puts out more horsepower, the305 = 3.75" bore and the 350 = 4" bore. Both have the same stroke.Also the starters are different because of the smaller flywheel but other wise the external parts are interchangeable.
bore is the diameter of the piston and stroke is the length the piston moves in the cylinder.for example if bore x stroke is 1x3 then 1 is the diameter of the piston and 3 is the length of the cylinder.if bore is greater than stroke then it is a short stroke engine.
The Bore of an engine is the tube that the piston goes up and down in.
Standard bore is 64mm and stroke is 57mm giving a capacity if 183.3cc. Maximum oversize piston from Suzuki is 65mm but aftermarket piston are up to 66mm, giving a displacement of 195cc.More help and information at suzukits.comCheersNigel in NZ
As far as I know bore and stroke is 66x57 but check to make sure.