just the exhaust will fit. The entire catback is different.
3 inch. The bigger, the better. The bigger the pipe the faster it will be for exhaust to escape. And the faster your exhaust escapes the faster your car can accelerate ultimately
How to hook up fuel lines to petcock on 98 gsx 600
yes you might have to change your exhaust manifold
No. As Kawasaki completely redesigned the kdx in 1989, and then once more in 1995.
yes, they will fit, no problem but they will not bolt up to the factory exhaust
I do not see the point in doing it but it would be a lot of work. it would be just like turbo charging a non-turbo car, running all the lines and all. also the engine in that car is weak. get a GST/GSX all ready turboed and has the 4g63 Actually, Depending if you have the DOHC (Dual Overhead Cam) model or not you may be able to do a direct bolt on of the turbo system off a vehicle with the same engine. But I recommend getting your turbo off of an eclipse GS Turbo or GSX because all the lines and the manifold and everything will already fit without any modifications. Getting it off of a laser would work, but not as well as would require many modifications to make it fit/work.
you could have a small hole in your exhaust between your engine and your muffler....you can patch the exhaust or replace your exhaust
Drivers side of the engine in the exhaust pipe below the exhaust manifold.
any 92-2001 integra will fit. also any Honda civic 92-2002 will fit also i believe
On the 2.5L, it is under the intake/exhaust on the back of the engine. On the 3.0L it is below the exhaust manifold on the front.
Check the exhaust manifold.
Look in the driver side exhaust manifold.