Yes it a mixes together
2 stroke engine ? Better to mix the oil and gasoline before pouring into the tank.
there isn't one you mix the gas and oil in the gas tank(make sure you have 2 stroke oil).
You have a mess.
If you mix the oil and gas together in the proper mix and do not add oil to the oil resivoir you will be fine.
It is oil injected, take the seat off and the tank will be located underneath. If the injection system is messed up, you can mix the gas to 32:1 and pour directly into the tank
What is the gas to oil ratio fot a 1982 Yamaha PW50? Do you need to mix it manually or does it automatically mix together by putting straight gasoline in the gas tank and straight oil in the oil tank?
Assuming that you have not run it yet, your best move is to drain the gas tank and refill with the correct mix for your 2-cycle engine. You can pour some 2-cycle oil in the tank, close the cap, and rock the mower to mix. But without knowing exactly how much gas you put in the tank, you run the risk of an incorrect mix damaging your engine. Not worth it in my opinion.
Remove the gas tank.
Depends, what do you need the additive to do ?
One of the little things of oil with a full tank of gas..1.5 g
how much water a lot or a little if a little add rubbing alcohol with a tank of gas a lot have the tank drained and a bottle on the first fill up alcohol wil mix with gas where gas dose not mix with water and this is the main thing in all the expensive fuel drys
Mixing bleach with gas can produce toxic fumes, such as chlorine gas, which can be harmful when inhaled. It can also create a fire hazard due to the combustible nature of gasoline. It is important to never mix these two chemicals together.