0
Yes. This is part of what is called wake turbulence.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Why do large aircraft have vertical tips on the ends of there main wings?
Wingtip devices are installed in an attempt to improve the performance of the wing in some way. Because they vary a bit is shape and in the manner they are attached, the way they modify the performance of the wing varies. The vertical wingtip devices, or winglets, generally act to reduce the vortex at the wing tip and decrease drag. The general answer to the question is that they have the wingtip devices to improve the aerodynamic performance of the wing.The vertical tip of the wing is called a 'winglet', and it is there to reduce the turbulence that is called a vortex, which is a spinning form of turbulence. These vortices can be clearly seen in videos of the space shuttle landing, when the camera angle is right. These vortexes cause drag, which slows the aircraft down, and reduces fuel efficiency.
Why do airplanes wait after another plane has taken-off?
They wait to allow the wake turbulence from the first aircraft to dissipate. Wake turbulence from heavy jets and those with unique wing designs (such as the B-757) can be extreme and cause other aircraft to lose control. Larger aircraft that might not be affected by the preceding aircraft's wake turbulence can waive or reduce the time required before taking off.
How will Boeing's Flying Wing plane not cause claustrophobia?
It will not cause claustrophobia because the "797" plane is not real, and Boeing says they want conjecture about it to end. The flying wing technology they're working with is for military use only.
What has the author Wing T Chu written?
Wing T. Chu has written: 'Turbulence measurements relevant to jet noise' -- subject(s): Turbulence, Free jets, Jet aircraft noise, Aerodynamic noise, Acoustics
What has the author Richard Shiu Wing Cheung written?
Richard Shiu Wing Cheung has written: 'Numerical prediction of propeller performance by vortex lattice method' -- subject(s): Vortex methods, Propellers
The greatest vortex strength occurs when the generating aircraft is?
Heavy, clean, and slow VORTEX STRENGTH The strength of the vortex is governed by the weight, speed, and shape of the wing of the generating aircraft. The vortex characteristics of any given aircraft can also be changed by the extension of flaps or other wing configuration devices as well as by a change in speed. The greatest vortex strength occurs when the generating aircraft is heavy, clean, and slow.
Why do some aeroplanes have a bend at the end of the wing?
The small "winglet" at the tips of the wings increases the lift by forcing a vortex to remain at the wingtip. An airplane wing forces air downward. At the same time, air from below the wing leaks around the wingtip and moves to the top, and a rotating "vortex" appears at the wingtip. Sometimes the location of this "leakage" process moves away from the wing tip, and the vortex migrates inboard along the wing toward the fuselage. The vortex then extends from the middle of the wing and not from the tip. When this occurs, negative lift is produced by the part of the wing outside the vortex location. The function of the small winglet is to increase lift by forcing the vortex back to the wingtip. to improve lift at the tip of the wing by redirecting and smoothing airflow - otherwise some wings at the tip have practically no lift, or in other words are nearly stalled - although its easy to see the large upwards pointing winglets on larger aircraft, some smaller aircraft (usually ones with high wings) also have a smaller version that is a slightly down curved wing tip that does the same thing Some aircraft have small winglets at the tip of the wings. This improves the lift of the wing. As the airflow passes over the wing, the flow on top of the wing has to travel a longer distance, so it speeds up and thus reducing pressure. This reduction in pressure on Top of the wing and the increase in pressure of the air flowing along Bottom of the wing produces the lift. However, the airflow wants to travel the path of least resistance. So, it tends to move Outboard away from the fuselage and toward the tip of the wing. The airflow at the tip slides off the end of the wing and produces a Vortex. This vortex can sometimes be seen under certain atmospheric conditions as vapor trails or contrails. This vortex is a lost Lift. The winglets reduce this vortex greatly and thus prevents lost lift.
What part of the planes wing controls the direction of the plane?
Rudder on the wing of the plane controls the direction.
What is the wing of a plane called?
It is just called the wing.
What is a plane with one wing called?
Mono plane.
Why are the wing tips on modern passenger jets upturned?
Upturned wingtips cause the plane to use fuel more efficiently.
What does the wing do on a plane?
It provides lift to keep the plane airborne.
