Want this question answered?
yes
The 1989 Acura Legend transmission shift cable is held in place with swivel nuts. Loosen the swivel nuts on each end of the cable. The transmission shift cable will come out.
The shift cable for a 1998 Ford Expedition allows the transmission to be shifted throughout the available gears. It is linked directly from the shift lever to the side of the transmission.
The gears in your transmission may be sticking or worn out. This would cause your transmission to not be able to shift.
The transmission uses a cable for linkage. If the car has consol shift the cable runs from the shifter to the transaxle. If it is a column shift the cable runs from a lever on the column to the transaxle.
If the transmission shift selector is cable operated, the adjustment would be located at the transmission end of the cable, where the cable housing is attached to the bracket on the transmission.
Shift cable has unhooked, fluid too low, transmission failed.Shift cable has unhooked, fluid too low, transmission failed.
Depending on the model they are usually located on the transmission. Just below the shift linkage and cable. Follow the shift cable to the transmission and you will find it. you will have to remove the shift cable and lever , then unbolt the switch and work it up off the shaft.
Look on the top of the transmission. The shift cable attaches to a "box" with a wire harness attached. That's it. Look on the top of the transmission. The shift cable attaches to a "box" with a wire harness attached. That's it. Look on the top of the transmission. The shift cable attaches to a "box" with a wire harness attached. That's it.
The cable between the shift lever and the transmission may be bad.
yes
If it's a stock transmission, the shift linkage is mechanical.