Test for power at the seat with a 12V tester. You may have a bad seat motor.Door locks are a separate circuit.
how do I replace a power antenna on my jeep Cherokee 1992
The silver fuse type THINGY's are Circuit Breakers & they Usally are for POWER SEATS-POWER DOOR LOCKS-KEYLESSENTRYMODULE-WINDOW LOCLOUT SWITCH-MASTER POWER WINDOW SWITCH-& THERE IS USALLY 2 IN A LeSABRE.
BCM's run dash components (eg:Digital odometer, speedometer) door locks seats etc on most cars.
burnt fuses
A more or less permanent (though difficult) solution might be to remove the door panels and disconnect the lock actuator wire connectors on the offending locks. Though if you have the door open, you might want to fix the locks instead. If the motors keep running but otherwise work OK, the solution might be to check and clean the limit switches. Alternatively, you might need to replace the door lock actuators. For a quick way to silence the locks, you can pull fuse #24, which will disable all the power door locks, as well as the power seats, the rear defogger, and the remote keyless entry system.
Maybe you should get your car serviced... and is there chewing gum in there?
If you aren't a master mechanic, take into the dealer and get them to do it. They will just hook it up to a computer and disable them digitally. If you are a mechanic, use the obd1 to disable the auto power locks. alternatively you could disable the power supply to the auto locks making them manual lock.
By pushing the switch on the driver's side door panel that locks and unlocks the windows.
The front seats should be compatible. The rear seats were designed differently between 1992 and 1995, so no on that.
Yes. There are many kits out there, or a salvage yard is a good source for all you need. Here is one source for a kit. http://www.truckstuffusa.com/powerkits.html
under the back seats. you have to lift the seats.
Tom Seats died on 1992-05-10.