0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
During an engines intake stage what passages inside the cylinder head must the incoming air and fuel mixture flow though in order to enter the cylinder?
Intake valve must be open to allow atomized fuel mixture to enter cylinder--than all valves are closed during compression stroke 4- stroke engine 1) intake valve open to allow fuel mixture to enter cylinder 2) compression stroke all valves closed 3) ignition stroke mixture is ignited by spark from spark plugs 4) exhaust stroke--exhaust valve is open to allow residue to escape
The Compression Stroke pulls the fuel-air mixture into the cylinder?
No, the intake stroke pulls fuel-air into the cylinder, the compression stroke squeezes (compresses) this mixture into a small volume.
Which stroke fills the cylinder with a charge of air and fuel?
Intake.
What enters the cylinder during the induction stroke on a diesel engine?
In an internal combustion engine with a carburettor a mixture of air and atomised fuel is drawn into the cylinder. If the engine is fuel injected compression ignition engine then air is drawn in, the fuel is introduced just before top dead centre of the compression stoke. If you mean intake stroke, then the answer is air.
In 4 stroke what is injected at suction?
A four stroke engine has four basic operations within the engine. It has Intake, compression, power and exhaust strokes. During the intake, or suction stroke, a mixture of fuel air is injected into the cylinder.
How many intake events are there in one revolution of a four cylinder engine?
There is only one intake stroke in a four-stroke engine. The other three strokes are compression, power, and exhaust. The intake stroke is a down stroke of the piston in which fuel is drawn into the cylinder while the fuel intake valve is open. The next stroke is the compression stroke in which the valves are closed and the fuel is compressed for combustion. The following stroke is the power stroke - a downward stroke of the piston after fuel combustion that drives the crankshaft. The final stroke is the exhaust stroke, an upward stroke of the piston as the exhaust valve opens to relieve the exhaust fuel fumes.
Fuel is combusted in the stroke of a four-stroke engine?
In the power stroke:Intake stroke --- draws the fuel mixture into the cylinderCompression stroke --- pressurizes the fuel mixturePower stroke --- ignites the fuel and causes the product gases to push against the pistonsExhaust stroke --- expels waste gases from the cylinder* PIE C is a good way to remember it. Or C PIE. *
Fuel is combusted in the stroke of a four-stroke engine.?
In the power stroke:Intake stroke --- draws the fuel mixture into the cylinderCompression stroke --- pressurizes the fuel mixturePower stroke --- ignites the fuel and causes the product gases to push against the pistonsExhaust stroke --- expels waste gases from the cylinder* PIE C is a good way to remember it. Or C PIE. *
During an engines intake stage what passages inside the cylinder head must the incoming air and fuel mixture flow through in order to enter the cylinder?
Intake valves.
During an engine's intake stage what passages inside the cylinder head must the incoming air and fuel mixture flow through in order to enter the cylinder?
Intake valves.
How fuel works in cars engine?
All gasoline engines are four-stroke designs. An engine has an intake stroke where the intake valve is open and the piston is moving downward, creating a vacuum that sucks the fuel into the cylinder. The next stroke is the compression stroke. The intake valve closes, and the piston begins to move upward and compresses the fuel in preparation for ignition. The third stroke is the power stroke. The piston is approaches the top of the cylinder in the compression stroke. Just before it gets to top dead center, the spark plug fires and ignites the fuel. The fuel rapidly expands and pushes the piston down with great force. The last stroke is the exhaust stroke. In this stroke, the piston completes the power stroke and begins to rise again. At this point the exhaust valve opens, and the piston forces the exhaust out of the cylinder in preparation for the intake stroke.
Why ports are used in two stroke engines?
To deliver fuel and oil too the cylinder.
