I found the resister, it is a small module held by 2 small screws on the base of the heater blower behind the glove box.
The heater (also refered to as the blower motor) for the 1993/94 Plymouth Laser can be found directly above where the passenger's feet would be. There should be THREE screws securing the heater to the car along with a single clip to disconnect it from the electrical. On a scale of 1/10, replacement is about a 3, the only real challenge being the lack of readily available light and it's awkward location. Expect to either shell out about 50$ or hit the internet hard for the replacement.
Laser teeth whitening is a process used to have sparkly white teeth. A dentist will apply bleaching gel and then use a laser to activate the substance.
Yueminglaser, msslasers, and laserresale offer laser cutting machines for sale. The price of the laser cutting machines differ according to what exactly you are interested in.
Laser sight is a small visible-light or infra-red laser used to enhance the targeting of weapon systems. It can for example be mounted parallel to the barrel of a handgun or rifle.
Laser toner cartridges are simply the 'ink' that a laser printer uses to write. They uses a type of dry ink particle that is picked by the drum through a static charge imprinted by the laser and then stuck onto the paper.
The heater resistor pack for a 2001 Ford Laser is typically located within the dashboard, near the heater core. To access it, you may need to remove the glove compartment and possibly other panels or components in the area. The resistor pack is usually mounted to the heater box and connected by electrical wiring. Make sure to disconnect the battery before attempting any repairs to avoid electrical hazards.
Ultralase is an opticians company which provides laser operations which can improve your eye sight. These laser operations heal people from bad eye sight.
Laser cutting works by directing the output of a high-power laser, by computer, at the material to be cut. The material then either melts, burns, vaporizes away, or is blown away by a jet of gas
Laser hair removal involves using a relatively strong laser to inhibit hair growth, often to the point at which it never grows back. Unfortunately, for major results to occur, a person would have to have several treatment sessions of laser hair removal.
BigLaser.com has plenty of industrial lasers, but I still don't see why you can't come up with something more efficient than a shark with a laser beam attached to its head. Industrial Laser Systems should have exactly the industrial laser you're looking for.
A hene laser work using a tube filled with helium and neon gas, and two mirrors. When the gas is excited, one mirror reflects the laser completely, while one lets a smaller percent of the desired wavelength pass through which emits the laser.
The Laser can be exactly tuned according to each patient's type of skin, guaranteeing an effective treatment. Read more: http://www.abimelec.com/dermatologist/laser_hair_removal.html#laser_hair_removal2#ixzz0h2v2cysS