F-250 check engine light stays on after changing battery?

Usally that means the battery has been disconnected within the last 10 starts

Only the computer can tell what made your check engine light come on. It could be your battery. If your battery is bad, replace it and see if that solves the problem. If it does not, then you will have to connect your car to the computer and find out why the check engine light came on.

i just changed my batterys out on my truck now my check engine light is on?

on most vehicles if you disconnect the battery cables it will reset the check engine light

To turn off the check engine light on a 1999 Toyota Camry you can disconnect the battery. This will only reset the check engine light. So if there is a persistant problem with the engine, the light is likely going to stay on. To turn off the check engine light on a 1999 Toyota Camry you can disconnect the battery. This will only reset the check engine light. So if there is a persistant problem…

Changing the battery will not make the light come on. The computer will automatically recalibrate itself after a few driving cycles. If the check engine light is on, you have a problem with the emissions system. Have the computer scanned with an OBD2 scan tool.

It is one of hundreds of things that could turn the check engine light on.

My check engine light came on because the terminals were not connected tightly. no. quite the contrary. if you have a "check engine" light on, disconnecting, or in this case replacing the battery will turn it off. you have a different problem.

Reset the Check Engine Light by disconnecting the battery for about 10 minutes.

One way to reset a 2005 Honda Element check engine light is to disconnect the battery. The battery will need to be disconnected for about 5 minutes for the light to reset.

One way to reset a Kia Rondo check engine light is to disconnect the battery for up to one minute. After the battery is reconnected, the check engine light should be off. If the light does not go off, there is a problem with the car and it will need to be checked out.

What year is your car? Did you mean the CHECK ENGINE light? The battery gauge?

To change a check engine light the dashboard must be removed this is best done by a mechanic. To reset a engine light unplug the cars battery for half a hour.

take a battery cable off

Need to reset computer...

Check the brake fluid...

The check engine light is a notification that the computer has detected a problem. You need to connect a diagnostic scanner to the vehicle and see what the code is saying.

changed battery engine light stays on

No, the check engine light comes on when the computer detects a malfunction and sets a code. No, the check engine light comes on when the computer detects a malfunction and sets a code.

A quick way to reset the check engine light would be to disconnect the battery for a short while

A low battery can cause the electrical system to flash check engine lights

A person can reset the check engine light by disconnecting the battery. It can also be cleared by using an OBD scanner.

To reset the check engine light unplug the battery for 30 minutes. If the issues still persists the light will still light up when reattached.

ONE thing that will do this is disconnect the battery , then reconnect the battery but if the check engine light comes back on then take the veh to the garage for more diagnosing of the systems

To reset the check engine light on a Hummer H3, the problem causing the check engine light should be repaired. If this does not fix the problem, the battery may need to be disconnected and re-connected.