Hi, I assume the cable is UTP cable. 1. Cable length (from the switch/hub to the PC) is more than 100 meters
2. Poor crimping (putting connector)
3. Poor connections Jack panel
4. The IRQ address of the LAN card is clashing with any other device in the PC
5. Connecting 100Mbps card to 10Mbps network
6. IP address clash with another PC's IP address (same IP defined in more than 1 machine)
7. Route table definition in the Switch/Router Things like this are the main cause of poor performance Hope this helps
Many factors can affect the response times on a LAN. A few are physical obstructions, distance, interference, signal sharing, bandwidth, poor antenna placement, finite spectrum, and endpoint devices.
LAN Times was created in 1988.
LAN Times ended in 1997.
LANs are affected by network worms which propagate through network shares.
Depending on the topology, increasing the number of nodes in a LAN or segment will result in higher collisions, more attenuation of the signal, and less throughput of data.
Pranic je Bog
Pranic je Bog
Lan-uv but lan-oo in northern dialects.
how unblock my lan
Average diadochokinetic rates in adults, based on an 1998 study, (syllables or times per 15 seconds) were 33.6, 33.16, 30.58; 24.21, 15.10, 26.50 and 26.30 for /a:-u:/, /u:-i:/, /i:-a:/, tongue movement from side to side of lip corner, lan lan lan lan la, /p-t-k/, and /ph-th-kh/.
Chih Lan has written: 'Lan chien chi'
The size of a LAN is set by the type of LAN configuration and specifications
LAN is live active network such as ps3 lan