One can easily be installed. Locate the wire that runs to the water temp sensor. Splice this wire to a switch and then off to a ground. When you flip the switch it will ground the wire and make the fan come on.
Do not get confused with the oil temp sensor. It controls the HOT oil light, not the fan.
The fan does not have a switch - the thermostat switch runs the fan.
A stock Honda Rincon 650 will go around 67 mph.
Mabye if you cleaned the fan out it might start to work again or the wires aren't connected.
what it the torque spec for head bolts on a 650 honda rincon 2005
60-65
no it does not.
10W40
A Honda Rincon
on a 2003 Honda si the fan motor blows shen removed from car. there is 12 volts to fan . fan will not run when plugged into car. does fan sw have anything to do with this
head bolt torque specs 680 rincon
that would be the rincon 650cc
I have a 1992 Honda Accord and have recently had to replace my fan relay. It was located under the hood at the top/left. Hope that helps. I own a 95 Honda Accord LX, the relay switch for my cooling fan is under the hood in with my fuses on the left upper side. ;-)