0
Fiat punto 1.2 speedgear engine runs ok but when gearbox put in drive there is no power to the wheels and engine just revs What is the problem?
Wiki User
∙ 11y ago
Low cvt oil level or selector control cable
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Where is the gearbox oil located on a fiat punto speedgear 2001?
The gearbox oil on a 2001 Fiat Punto Speedgear is located where the car's front drive wheels are. The gearbox isÊpumpkin shaped.Ê
What does cylinder do to an engine of a car?
The engine actually is a set of cylinders in which pistons move up and down in order to creat force which is transfered to the gearbox and then to the wheels
What is a function of the clutch in the vehicle?
The purpose of a clutch on a vehicle is to disconnect the drive of the engine from the gearbox (this would be required when the vehicle is stationary or to change gear). While the engine is running the crankshaft is continually turning, It is the crankshaft that turns the gearbox and via the gearbox the road wheels. Obviously there are times when the engine is running but drive is not required, The clutch is the mechanism by which this is achieved.
Does a MK2 golf 1.3 have overdrive?
Only if it has a completely different gearbox (with overdrive) fitted. You would then have to find an engine to fit the gearbox. You may have problems fitting this into the bodyshell, so I suggest you source a secondhand body from a car that will fit the engine and gearbox. Maybe you could fit the body from the car you took the engine and gearbox out of? Then all you need is an interior, driveshafts, brakes, wheels etc. and the job is done!
What type of device does the car use to move?
Engine, connected to the gearbox via the clutch and final drive through a differential to the drive wheels
Where can you buy a gearbox for power wheels?
contact the MFG
What does a drive shaft typically do?
A drive shaft is found in a frnt-wheel drive vehicle. It runs from the engine and gearbox to the front wheels. The engine generates energy, known as torque. The drive shaft carries the torque to the wheels forcing them to rotate, thus moving the vehicle.
What is the role of a clutch in car?
It allows the driver to disconnect the engine from the gearbox, so that the gear can be changed. The new selected gear can then drive the wheels when the cluch is released.
Where is the gearbox on 1974 vw super beetle?
between the rear wheels
What connects directly to the internal combustine engine in an automobile?
A typical drive train (rear wheel drive) : Crankshaft > clutch > gearbox > prop shaft > differential > drive wheels.
When I turn my wheels left or right it idle high Why?
When I turn my wheels left or right it idle high because there might be a problem with the power engine.
Why does the gearstick shake in your 206 1.4hdi at 50mphi changed both driveshafts and wheels and still no good?
Dont hold me to this i had the same problem in a clio sounds like your engine stabeliser is either not connected or its come lose i would even check the engine mounts for a worn bush. for the gearsrick to shake theres got to be play in something connected to it i.e. gearbox or engine. i don't know why you've changed the wheels and driveshafts if either one of them was to blame you would feel vibrations through the cars body and steering wheel.
