used on a floppy
The floppy drive cable would be about half the width than the other.
A 34-pin ribbon cable.
the technical name is frc i.e flat ribbon cable
The connectors on the ends of the cable are a different size than the connectors for a standard IDE device like a Hard Drive or CD rom. You should also notice that there is a twist in the cable between two of the connectors.
The floppy cable has a twist in the cable.
The ribbon cable is either plugged in upside-down or is damaged.
3 types of ribbon cables found in a PC are, a 34-pin floppy drive cable with twist, a 40-pin IDE cable with 40 wires, and a 40-pin IDE cable with 80 fine wires(80 conductor cable)A floppy drive cable, an IDE cable, and a CD or DVD drive cable
a cable for connecting a floppy drive to the computer motherboard.
your power supply has a small plug attach to it with several larger ones that go to your cdrom and hard drive it will fit in to the back of your floppy
Open the case and see if the power AND the ribbon cable are both plugged in. If the drive's read light is staying on constantly the cable is connected backward. Also, make sure the floppy is properly set-up in the BIOS.
There are two cables connected to the floppy drive; Power cable - 4 pins, Data cable - 34 pins.
There are two cables that connect to the floppy drive in a desktop computer.There is a four pin power cableThere is a ribbon cable that has a part twisted end (the twisted end connects to the floppy drive).