A fluorescent lamp refers to a low pressure Mercury-vapor gas-discharge lamp that uses fluorescence in order to produce visible light. It is also called a fluorescent tube.
A fluorescent lamp or fluorescent tube is a gas-discharge lamp that uses electricity to excite mercury vapor. The excited mercury atoms produce short-wave ultraviolet light that then causes a phosphor to fluoresce, producing visible light. A fluorescent lamp converts electrical power into useful light more efficiently than an incandescent lamp. Lower energy cost typically offsets the higher initial cost of the lamp. The lamp is more costly because it requires a ballast to regulate the flow of current through the lamp.
Not in the way that an incandescent bulb does. A fluorescent lamp uses electricity to excite the particles of mercury vapor in the tube. This excited gas causes a phosphor to glow.
Agapito Flores invented the fluorescent lamp...
hahahahahha
agapito flores
It is a High Pressure Mercury Vapour lamp.
A plasma arc of argon gas and/or other ions, such as mercury vapour, depending on the gas mixture used in the lamp.
A combination of neon, argon, xenon, krypton, sodium, metal halide, and mercury. The common fluorescent lamp is a low pressure mercury arc lamp.
I think it's mercury. Not sure though.The most common gas used inside fluorescent lamps is Mercury vapour.
The abbreviations are CFL - Compact Fluorescent Lamp, MHL - Metal Halide Lamp, HPMV - High Pressure Mercury Vapor, and one more is HPS - High Pressure Sodium lamp
the supply voltage to a mercury vapour lamp (from the electromagnetic ballast) is 130vac
Mercury
A fluorescent lamp contain mercury so the identities of spectrum are normal.
220 lumens is equal to a tungsten incandescent light bulb of 15 watts. Halogen lamp 20 watts. Fluorescent lamp 60 watts. LED lamp 60 watts. high pressure sodium vapour lamp 117 watts. Mercury vapour lamp 50 watts or 17.32 candle power
mercury
The light in Sodium Vapour lamp is from an atomic emission process whereas in Mercury Vapour Lamp it is, finally, from fluorescence emission. The mechanism of light emission in a sodium vapour lamp is simple and straight-forward. The filaments of the lamp sputter fast moving electrons, which hit the sodium atoms(vapour) causing the valence electrons of the sodium atoms to excite to higher energy levels and the electrons thus excited relax by emiting the characteristic monochromatic bright yellow light(589nm). The mechanism in mercury vapour lamp is more involved and sequential. The sputtered electrons from the filaments, after having been accelerated by high voltage, hit the mercury atoms. Here also, the excited electrons of mercury atomsrelax by emitting characteristic but ultravilot(254nm,invisible) light. The photons of this ultravilot light fall on the fluorescent layer on the inner walls of the tube and excite the molecular bonds of the fluorescent material to various electronic and vibrational energy states. Hence, the light from the mercury vapour lamp is white. The basic difference between the two is, the former works by electric discharge (passage of electricity through sodium vapours at high/low pressure) while the latter works through the combined effect of electric discharge through mercury vapours and fluorescence from phosphors (luminescent materials). Although sodium vapour lamps produce much higher light output (about 90 lumens/watt) they cannot be used in lighting applications where colour-rendering property is very crucial. This is because most of the light emitted from a sodium vapour lamp is concentrated in the yellow part of the visible spectrum (around 580-590 nm) On the other hand, a mercury vapour lamp is quite suitable for lighting applications. This is because, the mercury vapour lamp can feed almost the entire visible region (380-780 nm) of the human visual system. Conventional fluorescent lamps can also be called as low-pressure mercury discharge lamps. In this system, when electric discharge strikes mercury vapours held at low pressure ( a few mm of mercury) it produces a lot of ultravilot radiation dominantly at 254 nm inside the column of the discharge tube. This UV radiation when impinging on the white coating made of fluorescent materials coated inside the discharge column of the tube will generate white light(called daylight). Light output from a fluorescent lamp is moderate (60 lumens/watt) while the colour-rendering index is high. posat by Chinmoy kanjilal and Tushar dhara,research scientists,SMIT,Sikkim,India.
A Compact Fluorescent Lamp (CFL) is type of energy-saving bulb made from a small glass tube which is filled with mercury vapour. It has a phosphorescent coating on the inside of the tube which glows...