Need to know what the problems are.
Motorcraft BXT - 65 - 650 according to the 2000 Ford Expedition owners manual ( Ford also has cheaper batteries available )
Yes, it will fit
spray wd40 in all the latches then open and shut all the doors a couple of times
The gas gauge in the Eddie Bauer Explorer probably does not work due to a bad fuel sending unit. The sending unit is in the fuel tank in the same access area as the fuel pump.
The vehicle will have two sensors one in each of the exhuast manifolds. Use a special socket available from just about any auto parts store. I realize that a special tool is needed, but what is the process for accessing the sensor?
Yes,I had the air suspension taken off and replaced with coil springs. I have a 98' Eddie Bauer, the dealership did after I got fed up with the air suspension. Good luck!
What problems are you referring too? I have a 1998 Ford Expedition Eddie Bauer (5.4L) And, I have problem with the 4x4...
Yes , XLT and Eddie Bauer are just two of the Ford trim levels
The difference between 98 expeditions and the Eddie Bauer edition are a few things for example Digital Thermostat, rear vent windows, air suspension, exec...
If it has air suspension there will be a shut off switch for the air suspension The switch is located behind ( 2 ) access panels that are in the cargo area , on the driver's side , by the liftgate
30 U.S. gallons with the rear air suspension ( 26 U.S. gallons for 2 wheel drive / standard suspension )
If the heater is not working in your Eddie Bauer edition Ford Expedition, your heater core is probably junk and needs to be replaced.
The NHTSA doesn't list any recalls for suspension problems on a 1999 Ford Explorer - the only thing close would be the Firestone tires.
The Ford Expedition XLT or Eddie Bauer are two of Fords trim levels ( Eddie Bauer having more standard features than the XLT ) So , if the Ford Expeditions are the same model years , the amount of space inside is the same
Ford Expedition EB
Yes , XLT and Eddie Bauer are just two of the Ford trim levels
For this answer you will need to either use an OBD code reader or go to a shop that can read codes. Also make sure that your air suspension switch is turned on.