Go to a wrecker and get a used lock from there.
it is behind the lights, accessed from inside the boot, behind the side covers.
The most common (polyethylene or polypropylene) plastic drums measure 22" in diameter (inside) and 34" tall/high.
The bore of a barrel is the inside of it.
removel of door panal in ford fiesta 2002
One difference is that the inside of a shotgun barrel is smooth and the inside of a rifle barrel is what they call "fluted" which puts rotation on the bullet as it moves though the barrel.
No, there is no difference between an inside and outside barrel. Doran is an idiot
Depends on what's inside the barrel
Simple, it it is a true barrel simple find the measurement from inside to inside of your barrel and divide by 2. IF it is not a perfect half circl barrel or true barrel, simple find your chord (measurement inside to inside) and find your rise. Once you have these measurements you can use your diameter formula to figure the radius
The plastic fitting connecting the rods is probably broken. visit the breakers to get a new one
somewhat dark and dirty. just think what the inside of a barrel would look like if you built a fire in the barrel......................
you have to unscrew the panel from the door then carefully pull the panel away from the door and make sure when putting it back in you put all the little plastic joiners in proply
it is inside the bell housing