0
I had to get one from my local parts store for my 1993 Mustang it was called a DIN radio removal tool for about 5-10 bucks.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you remove the factory radio from a 1996 sable?
by using the Ford radio removal horseshoe tools. Takes a couple of seconds.
1995 Ford Ranger radio removal?
You need the special tools that fit in the small holes on either side of the radio. They can be purchased online for as little as 5 bucks.
How do you take out the stock cassette player in a 1994 Ford Thunderbird?
FORD RADIO REMOVALYou should purchase a set of ford radio removal tools .. they slide in on both sides of the radio in the two holes.Once you insert them push in on them about half an inch and you should feel them catch,,then pry out ward slightly on both tools this will release the radio and pull forward .. your done.
How do you remove radio from 2012 ford e 250?
2012 ford e-250 radio removal
How do you take out the stereo on a 97 Lincoln Continental?
Ford motor company sells a kit of tools for removal of radios in the 96-98 tears. After removal of the radio you will have to have a code to get it to work. Consult your Lincoln dealer.
How do you remove stock stereo 1995 ford bronco Eddie Bour?
Use the U-shaped radio removal tools. They are available from most auto parts stores. Once you get the tools, it should only take about two minutes to remove the radio. You insert the tools into the holes on the sides of the front of the radio, push them slightly outwards, and pull the radio out.
How do you take out 1985 Ford Tempo stereo?
with "ford radio removal tool"
How do you take out a stock stereo in a '95 Ford Thunder-bird?
go to your parts store and ask for the Ford Radio Removal Tools, about $5, two U shaped prongs that go into the 2 holes on each side of Ford radios to release the clips on side of the radio so you can pull it out.
How do you remove the factory radio from a 1998 ford ranger?
The radio has 2 holes on each side of it, one above the other. These holes are for the removal tools, 1 tool needed for each side. The removal tools consist of "U"-shaped rods with pointed tips. The tips are inserted into the holes about 1/2". Not too far, or you could damage the clips that hold the radio in place. Insert the tools until you hear a "click" from each hole. Once inserted properly, push slightly outward on the tools and use them as handles to pull out the radio. It's that simple!
How do you remove the stereo in a 2001 Ford Escape?
you must buy a removal tool () insert the U shapped tools into the holes on both sides of the radio until locked, pull straight out
How do you remove radio in ford focus sony edition?
I bought a Ford removal tool at Best Buy for 6 bucks. I then bent it so I could insert 1 of the ends of each of the tools into the holes in the stereo facia. I then just pulled on the tools and the unit came out. I hope this helps.
Whats the best way to remove a radio from a 1994 ford econoline van?
Go to walmart and purchase the Ford radio or the Scosche DIN Radio Removal Tool.Cost is about $7. with this you can have the radio out in seconds, literally.
