On one side only?
The bulb at the rear is blown...
Both sides?
Both bulbs at the rear are blown, or perhaps a wiring fault?
they are 6.75 inches{front&rears}
the front are 5.25 inches and the rears are 6x9s
4X6's in the front of the dash... 6x9's in the rears...
18psi in the front tires, 26psi in the rears.
6in round in the front doors and 6x9in oval on the rears
Front speakers are shallow 5 1/4" and rears are 4"
the fronts are 4x6 and the rears are 6x5
Front dash mounts: 4*6" Rears - 2 door: 6*9" Rears - 4 door: 6 1/2" round
the rears are 7"x5" and the front are 6 1/2" (16.5cms) cicular speakers
19 mm front 14 rears and 45 for hex key
Use 1 channel for fronts & the other channel for the rears.
EBD: Electronic Brake Distribution (or Electronic Brake-force Distributor) - alters how much of the brake force goes to the front and how much to the rear. Cars always have more braking on front as if the rears lock before the front then the car will spin. How much braking you can do with the rears depends on how much weight is in the vehicle so EBD dynamically adjusts this balance. Without it, the manufacturer sets up the balance so the rears don't lock when the vehicle is empty which is less braking than is possible when the vehicle is full.