change a when the gas goes from liquid to gas is a physical change. Change b when the gas burns is a chemical change
physical change
nothing
no it is not a chemical change but physical change as it can be turned back to gas by some physical or chemical process.
physical
It is a Physical change
If you have a physical cylinder to measure, measure the "width" of the circle that is the cross section of the cylinder. That is the diameter, Half the diameter is the radius.
physical change
nothing
Physical damage to a cylinder is seldom repaired. More often the motor is replaced.
no it is not a chemical change but physical change as it can be turned back to gas by some physical or chemical process.
The test pressure is always stamped on the cylinder along with the working pressure, physical volume, manufacture date etc. It is generally about twice the working pressure of the cylinder.
It is a pneumatic system. Compressor. Hoses. Spray oil. Valves. Cylinder. Jet.
A four cylinder engine can be built to be EXTREMELY powerful, either my machining of the physical metal (head and block) to allow for more cylinder displacment and volumetric efficiency, or by use of "power adders" such as tubro or supercharger kits, nitrous oxide, and various intake systems. The limit is your imagination (and your wallet). -Ben
The size of an engine is usually defined by its total cubic capacity. Therefore a four cylinder engine could be 'bigger' than a V12, and vice versa. This is also true of the physical size. There are huge four cylinder engines on ships for instance
An incorrect fouler and a cracked piston ring.
a graduated cylinder is filled with water to a level of 40.0 mL. when a piece of copper is lowered into the cylinder, the water level rises to 63.4 mL. Find the volume of the coppersample . If the density if the copper is 8.9g/cm, what is the coppers mass?
Con rod is short for 'Connecting Rod'. It is the physical link between the rotating crankshaft, and the piston. It allows the rotating force of the crankshaft to push and pull, up and down, the piston in the cylinder