The governor pressure sensor is located within the transmission's fluid pan. It's mounted on a bracket with three 11 mm bolts and two #25 torx screws. This was on a '99 Dodge Durango with a 5.9 L motor.
As your looking at the engine it is to the left of the distributor cap.
A 1999 Durango does not have any part called a GPS sensor.
uh what transmission. what sensor
A 1997 Chrysler Town and Country does not have a governor pressure sensor.
The 2006 Dodge Durango camshaft position sensor is located on the back end of the head. The position sensor should be labeled as such.
The oil pressure sensor is on the oil cooler, under the intake manifold.
The governor pressure sensor is on the passenger side of the valve body inside the transmission.
It doesn't have a mass air flow sensor.
Roughly $350 in parts and $150 for labor.
Inside the transmission, on the passenger side of the valve body.Inside the transmission, on the passenger side of the valve body.
Back of engine, next to distributor.
It is on the passenger side of the valve body, inside the transmission.